Instruction Manual for Disney Vinyl Auto Blade Kit

11
f Create a new folder in the USB flash drive, and then select the folder to save the tiled data.
Memo
• When saving tiled data, be sure to create a folder on a USB flash drive, and then save the data in the folder. Do not delete data created
in the folder or change the name of a file.
• If the folder already contains a file with the same name, the data in the folder will be automatically overwritten.
g Insert the USB flash drive into the USB port (for a USB flash drive) on the cutting machine.
hIn the screen for selecting the location where the data has been saved, touch the key for retrieving from a USB flash drive.
 The name of the folder created on the USB flash drive in step f and a preview of the pattern appear.
To retrieve a roll feeder pattern, retrieve the pattern from the “Roll Feeder” screen.
i Select the first pattern of the tiled data to be cut, and then touch the “OK” key.
 After confirming the selected pattern, touch the “OK” key.
j If necessary, edit the pattern and touch the “OK” key, and then start cutting.
 When cutting is finished for the first pattern of the tiled data, press the home button, and then repeat the procedure from step h to retrieve
and cut out the remaining patterns.
Memo
• Before cutting material with backing paper or backing film, such as adhesive craft vinyl or iron-on transfer material, make sure that the
pattern is flipped to create a mirror image and "Half Cut" in the settings screen has been set to "ON".
k After all patterns have been cut out, join the cutouts in the order of their file names.