Instruction Manual for Calligraphy Starter Kit

8
The calligraphy pens that can be used with this machine are those with a 2.0 mm pen tip or 3.5 mm pen tip.
There are two pen adjusters: A (for a 3.5 mm pen tip) and B (for a 2.0 mm pen tip). As a default, pen adjuster A (for a 3.5 mm pen tip)
is installed in the calligraphy stand. For details on changing the pen adjuster, see “Changing the Pen Adjuster” on page 11.
Using the Calligraphy Pen Holder
The procedure for using the calligraphy pen holder is described below.
● You can also check how to set the calligraphy pen in the video;
http://s.brother/cvsaa/
a To change the indicator setting of the pen adjuster, push down on the release lever on the calligraphy stand.
a Release lever
b Rotate the tab on the back of the pen adjuster to align the indicator with the setting (*) for the calligraphy font to be used.
• Setting that appears in the screen shown in step h on page 6
a Tab
b Indicator
Preparing the Calligraphy Pen
■ Calligraphy stand ■ Calligraphy pen holder ■ Calligraphy pen
a Release lever
b Pen adjuster
a Dial a 2.0 mm pen tip
b 3.5 mm pen tip
b
a
a
a b
a
2
1
a
b