Instruction Manual for Calligraphy Starter Kit

5
For detailed instructions on using the cutting machine, refer to the Operation Manual supplied with it.
● The appropriate mat differs depending on the material type. For details, refer to the “Mat Selection” table in the Quick Reference
Guide for the cutting machine.
In the following procedure, the included sample card is used.
a Attach the included sample card to the standard tack adhesive mat.
• Attach the material so it does not extend from the attaching area of the cutting mat.
b Set the scanner lever (on the left side of the machine) to “2”.
c Insert the USB flash drive containing the calligraphy font into the USB port of the machine.
• The calligraphy font saved to a USB flash drive can only be used on a machine registered with CanvasWorkspace.
d Retrieve the calligraphy font on the machine.
Retrieving the Calligraphy Font on the Machine for Drawing