Instruction Manual for Calligraphy Starter Kit

3
A calligraphy font and patterns are available for immediate use in CanvasWorkspace (http://CanvasWorkspace.Brother.com).
Use the included activation card to activate the calligraphy font and patterns in CanvasWorkspace.
● In order to activate the calligraphy font and patterns, your cutting machine must first be registered with CanvasWorkspace. For
details on registering, refer to the Wireless Network Setup Guide for the cutting machine.
● Note activation code is good for one ScanNCut DX machine only. Once the activation code is registered, the data cannot be
used in another machine.
● Data using the calligraphy font or patterns cannot be created or edited in CanvasWorkspace. Use the cutting machine to create or
edit data.
● A USB flash drive is required in order to use the calligraphy font.
● For compatible USB flash drives, please visit our website“ http://s.brother/cpoac/ ”
Activating Calligraphy Font and Patterns in CanvasWorkspace
a Log in to CanvasWorkspace. (http://CanvasWorkspace.Brother.com)
• First-time users should create a free account.
b Click in the upper-right corner of the screen.
c Click [Pattern Collection Activation].
d Type in the activation code on the included activation code card, and then click [Activate].
• The uppercase letters “O” and “I” are not used in the activation code.
• The activation code is valid for only one CanvasWorkspace login ID. The same activation code cannot be used again.
e Select a registered cutting machine.
Activating Calligraphy Font and Saving to USB Flash Drive