Instruction Manual for Calligraphy Starter Kit

11
Changing the Pen Adjuster
There are two pen adjusters: A (for a 3.5 mm pen tip) and B (for a 2.0 mm pen tip). Change the pen adjuster according to the pen to
be used.
● As a default, pen adjuster A (for a 3.5 mm pen tip) is installed in the calligraphy stand.
a Push down on the release lever on the calligraphy stand.
a Release lever
b Pen adjuster
b Rotate the tab on the back of the pen adjuster to align the indicator with the unlock position ( ).
a Tab
b Indicator
c Unlock position ( )
c From the bottom of the tab, push up the pen adjuster, and then remove it from the calligraphy stand.
a
b
a
b
c