User's Guide
Table Of Contents
- STORE OPERATIONS MANUAL
- Table of Contents
- SET UP
- DESIGINING A STAMP
- Overview
- Stampcreator P-touch Editor
- Tools for Formatting
- Formatting a Stamp
- Selecting the stamp size
- Typing text
- Changing the font
- Changing the character size
- Changing style effects
- Changing the font of a text block
- Changing the character size of a text block
- Centering text within a block
- Vertical and horizontal block alignment
- Drawing lines in a stamp
- Drawing a frame
- Changing the frame size
- Using special design frames
- Creating stamps with clip art images
- Creating stamps with pictures
- Advanced Steps
- Stampcreator Express
- MAKING A STAMP
- CARE & TROUBLESHOOTING
- SUPPLIES & ACCESSORIES
- SUPPORT NUMBERS
- brother ENG
Safety precautions
Read all of these instructions and save them for later reference. Follow all warnings and instructions marked on the
product.
The symbols used in this manual are as follows:
■ To use the machine safely
Warning
Tells you what to do to avoid the risk of injury.
Caution
Tells you about procedures you must follow to prevent damage to the printer.
Action NOT allowed to do. DO NOT disassemble the product.
DO NOT splash the product with or immerse the
product in water.
DO NOT touch a given portion of the product.
Mandatory action. Unplugging.
Alerts to the possibility of electrical shock.
Warning
Follow these guidelines to avoid fire, electric shock, or other damage.
■ The Printer
Unplug the power cord immediately and stop using
the printer during an electrical storm. There may be a
remote risk of electric shock from lightning.
Do not touch any metal parts near the print head. The
print head becomes very hot during use and remains
very hot immediately after use. Do not touch it
directly with your hands.
Dispose of plastic bags correctly and keep away from
babies and children. Do not wear or play with plastic
bags.
Unplug the power cord immediately and stop using
the printer if you notice any abnormal odor, heat,
discoloration, deformation or anything unusual when
the printer is in use or storage.
Do not disassemble the printer.
For inspection, adjustment and repair of the printer
contact the retail outlet where the printer was
purchased or your local authorized service center.
Do not drop, hit or otherwise bang the printer.
Do not allow the printer to get wet in any way.
Do not use the printer with foreign objects in it. If
water or any foreign objects should enter the printer,
unplug the power cord from the electric outlet and
remove the foreign object. If necessary, contact the
retail outlet where the printer was purchased or your
local authorized service center.
Never look at the flash which may leak from the
stamp compartment.
DO NOT put your fingers on the edge of the machine
under the ink ribbon compartment cover. Doing this
may cause injury.