User's Guide

23
DESIGINING A STAMP (Stampcreator P-touch Editor)
Drawing lines in a stamp
a Type in the text (refer to the section “Typing text” on page 19).
☞ NOTE: Text can be inserted before or after drawing a
line.
b Select the Line tool, and then drag the pointer in the layout area to
draw the desired line (see figure 14).
☞ NOTE: To draw a straight line, drag the pointer while
holding down the Shift key.
Changing the line length
a With the Select tool, click the line.
• A box appears on both ends of the line.
b Drag either box to adjust the line length.
Changing the line width and style
a With the Select tool, double-click the line to display the Line Properties
dialog box.
b On the Drawing tab, select the line style and/or weight, and then click
the OK button (see figure 15).
☞ NOTE: The line width and style can only be applied
once to each line.
Deleting a line
a With the Select tool, click the line.
b Press the Delete key on the keyboard.
figure 14
figure 15