User's Guide

21
DESIGINING A STAMP (Stampcreator P-touch Editor)
Changing the character size of a text block
a Display the Text Properties.
b With the Select tool, click the block of text to be changed in the stamp
layout. Handles appear around the text block.
• The current character size is shown in the Text Properties.
c From the “Size” drop-down list, select the desired character size (see
figure 8).
• The selected text is changed.
Using the Maximum button
a Display the Layout Properties.
b With the Select tool, click the block of text to be changed in the stamp
layout. Handles appear around the text block.
c Click the Maximum button in the Layout Properties (see figure 9).
• The size of the text is automatically adjusted to the maximum layout
area of the selected stamp size with the original vertical and horizontal
proportions.
Manual adjustment
a With the Select tool, click the block of text to be changed in the stamp
layout. Handles appear around the text block.
b Drag a handle to adjust the text block to the desired size (see figure 10).
• To adjust a text block while keeping the original vertical/horizontal
proportions, use the Select tool to select a corner handle. Then, while
holding down the Shift key, drag the handle.
figure 8
figure 9
figure 10