Specifications
Specifications
4
S-7200A-
0
3
5
Minimum lubrication
Semi dry
Complete dry
Lubrication type
Lubrication type
Use
Max. sewing speed
End backtacking speed
Max. stitch length
Presser foot height
Needle bar stroke
Needle(DBx1 DPx5)
Rotary hook*
2
Feed dog
Feed dog height
Weight
Arm pocket size
Arm bed size
Bobbin winder
Machine head drive
Motor
Control circuit
Model
S-7200A
Quick
back
Thread
wiper
Solenoid-type
presser lifter
S
3
5
For light-weight
and difficult-to
sew materials
For medium-
weight materials
For heavy-
weight materials
Use
1-needle Thread trimmerLock stitch
*1
When sewing at speeds of 4,000 rpm or higher, set the stitch length to 4.2 mm or less.
*2
When using lubrication-free rotary hook, set the Max. sewing speed 4,000 rpm or less.
403
For medium
materials
5,000 rpm*
1
5mm
11-18
Lubricated / for
medium materials
4 row
0.8mm 1.2mm 0.8mm 0.8mm 0.8mm 0.8mm
4 row 4 row 4 row 4 row 4 row
31mm 35mm 29mm 31mm 29mm 31mm
Lubricated / for
heavy materials
Lubricated / for
light materials
Lubricated / for
medium materials
Rotary hook RP
(lubrication-free
rotary hook)
Rotary hook RP
(lubrication-free
rotary hook)
19-22 NS9-11 11-18 NS9-11 11-18
5mm 4.2mm 5mm 4.2mm 5mm
4,500 rpm*
1
4,000 rpm 5,000 rpm*
1
4,000 rpm 4,000 rpm
For heavy
materials
For light materials and
difficult-to sew materials
For medium
materials
For light materials and
difficult-to sew materials
For medium
materials
Minimum lubrication
High-speed spindle
Rotary hook
A standing operation connector is equipped as standard.
Needle bar/
Thread take-up
High-speed spindle
High-speed spindle
Special Brother grease
Special Brother grease
Semi dry
220-1,800 rpm
Presser bar lifter 6 mm, Knee lifter 16 mm, (Solenoid-type presser lifter 10 mm)
Machine head: 44kgf, Control box: 6.1kgf (low voltage) 9.2kgf (high voltage), Operation panel: 0.8kgf
Arm pocket width: 300 mm, Arm height: 136 mm
517.5mm
178mm
Included in machine arm
Direct drive mechanism
AC servo motor (4-pole, 450W)
Microprocessor
Single-phase 100-120V, 200-240V, 3-phase 200-240V,380-415V Power rating 400VA
1,800 rpm
Complete dry
405 43S 433 45S 453
To preserve environment, this catalog is produced using the ECF paper (Elemental Chlorine-Free) and SOY INK.
R
15-1,Naeshiro-cho,Mizuho-ku,Nagoya 467-8561, Japan.
Phone
:81-52-824-2177
Fax
:81-52-811-7789
http://www.brother. com/
Product specifications are subject to change for improvement without notice. Please read instruction manual before using the machine for safety operation.
Printed in Japan 2003.2. I3030829B Vol.1
Start backtacking
and continuous
backtacking speed
Lubricating
oil
Power requirement
Power consumption