Specifications

Excellent material compatibility
Higher sewing quality
Easy for operators to use
Sewing
direction
• Attractive sewing finishes for a wide range of materials
The S-7200A has an optimized needle bar, thread take-up loci and
feed loci. In addition, the adjustment range for the feed dog has been
increased, allowing a greater range of different types of material to be
sewn. Attractive finishes can be obtained with no puckering or
slippage, even with materials that slip easily and stretch materials.
• A penetration force boosting function lets you sew even heavy materials
If the needle penetration resistance increases, such as when sewing heavy materials and materials with
joints, vibration control automatically increases the penetration force. (Patent pending)
Feed dog height adjustment range
Previous model S-7200A
0.8mm 0.9-1.0mm
1.0mm 1.1mm
1.2mm
S
3
5
1.3mm
The presser foot adjustment screw
has an adjustment scale. The
presser foot pressure can be
controlled numerically, so that you
can reset it easily and accurately
when required.
• Presser foot pressure can
reset easiling
You can set whether or not the
tension release operates when
the presser foot is raised.
Uniform thread tension can be
obtained even while the presser
foot is raised when sewing
around corners, thus maintaining
attractive finishes.
• Adjustable tension release
operation
This feature is ideal for
use when sewing thin
materials that can
easily pucker when
reverse stitches are
sewn. Condensed
stitches have a smaller
sewing pitch and they
help prevent fraying.
• Condensed stitching is possible
A rotary-type thread trimmer is
used to provide stable thread
trimming regardless of the type
of material being sewn.
• Stable thread trimming
The position of the machine head
hinge has been shifted 150 mm to
the right, on the other side of the
needle bar from the operator.
• Smooth sewing with no hinge
in the way
The bobbin winder is located at
the top of the sewing machine
arm. This makes it easy to adjust
the bobbin winding amount and to
replace the bobbin.
• Easy-to-operate bobbin winder
A variety of attachment taps are
provided on the top of the bed.
• Various commercially available attachments
can be installed quickly and easily
A micro-adjustable type floating presser
foot is equipped as standard. This
device is ideal for controlling presser foot
floating in materials that stretch easily
and materials with long pile. It prevents
seam slippage and also prevents
damage to the material. In addition,
three-dimensional articles with irregular
curves can also be handled with ease.
• Optimized floating presser foot
for long pile materials
• Because no V-belt is used belt
shavings will not stain the material