P-touch Template Manual/ Command Reference

5
Control code list
Commands that can be set or obtained in P-touch Template mode
^PT
5E 50 54 Dynamic Select print start trigger
^PS 5E 50 53 Dynamic Specify print start command text string
^PC 5E 50 43 Dynamic Specify print start received character count
^SS 5E 53 53 Dynamic Specify delimiter
^TS 5E 54 53 Dynamic Select template
^CF 5E 43 46 Dynamic Full cut setting
^CH 5E 43 48 Dynamic Half cut setting
^CP 5E 43 50 Dynamic Chain printing setting
^MP 5E 4D 50 Dynamic Mirror printing setting
^LS 5E 4C 53 Specify line spacing with line feed
^CC 5E 43 43 Dynamic Change prefix character
^RC 5E 52 43 Dynamic Specify line feed command text string
^CN 5E 43 4E Specify number of copies
^NN 5E 4E 4E Specify number of Numbering copies
^ID 5E 49 4E Initialize template data
^QV 5E 51 56 Dynamic Specify QR Code version
^FC 5E 46 43 Dynamic FNC1 replacement setting
^II 5E 49 49 Initialize
^OP 5E 4F 50 Perform machine operations (feed/cut)
^SR 5E 53 52 Status request
^VR 5E 56 52 Retrieve version Information
^CR 5E 43 52 Line feed in object
^OS 5E 4F 53 Select object (object number)
^ON 5E 4F 4E Select object (object name)
^DI 5E 44 49 Directly insert object
ESC ia 1B 69 61 Dynamic Specify command mode
* The commands listed above must be used in P-touch Template mode.
They cannot be used in raster mode or ESC/P mode. (except ESC ia)