P-touch Template Manual/ Command Reference

2
[Contents]
[Contents]............................................................................................................................2
Control code list ................................................................................................................5
Commands that can be set or obtained in P-touch Template mode .......................5
Commands that can be set or obtained in raster mode..........................................6
About P-touch Template....................................................................................................8
Static and dynamic commands..........................................................................................8
If printing does not begin (main most frequent causes).....................................................8
Control command details...................................................................................................9
^PT Select print start trigger................................................................................9
^PS Specify print start command text string......................................................10
^PC Specify print start received character count............................................ 11
^SS Specify delimiter.........................................................................................12
^TS Select template..........................................................................................13
^CF Full cut setting........................................................................................14
^CH Half cut setting .......................................................................................15
^CP Chain printing setting .............................................................................16
^MP Mirror printing setting .............................................................................17
^SP Special tape setting....................................................................................18
^LS Specify line spacing with line feed .............................................................19
^CC Change prefix character.........................................................................20
^RC Specify line feed command text string....................................................21
^CN Specify number of copies .......................................................................22
^NN Specify number of Numbering copies.....................................................23
^ID Initialize template data ...............................................................................24
^QV Specify QR Code version .......................................................................25
^FC FNC1 replacement setting......................................................................26
^II Initialize......................................................................................................27
^OP Perform machine operations (feed/cut)..................................................28
^S R Status request ........................................................................................29
^V R Retrieve version Information ..................................................................33
^CR Line feed in object ..................................................................................33
^OS Select object (object number).................................................................34
^ON Select object (object name)....................................................................34
^DI Directly insert object ..................................................................................35
ESC ia Specify command mode........................................................................35