ESC/ P Command Reference
Table Of Contents
- Control code list
- Print area
- Characters
- Print position
- Line feed amount
- Document creation flow
- Control command details
- Character/style selection commands
- Text printing commands
- ESC 4 Apply italic style
- ESC 5 Cancel italic style
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Apply double-strike printing
- ESC H Cancel double-strike printing
- ESC W Specify double-width characters
- SI Specify compressed characters
- ESC SI Specify compressed characters
- DC2 Cancel compressed characters
- ESC - Apply/cancel underlining
- ESC ! Global formatting
- ESC X Specify character size
- ESC i f Apply/cancel a frame (global)
- CAN Clear text
- DEL Delete one character
- ESC CR Not available
- Line feed commands
- Horizontal movement commands
- Vertical movement commands
- Paper formatting
- Printer control commands
- Graphics commands
- Kanji commands
- Advanced commands
- ESC i B Bar code
- ESC i Q 2D bar code (QR Code)
- ESC i P Specify QR Code version
- ESC i V 2D bar code (PDF417)
- ESC i D 2D bar code (DataMatrix)
- ESC i M 2D bar code (MaxiCode)
- ESC i F Print transferred data
- ESC i a Switch command mode
- ESC i S Request printer status
- ESC i L Apply/cancel rotated printing
- ESC i C Specify cut setting
- ESC i U B Specify baud rate
- ESC i U b Specify bit length
- ESC i U P Specify parity setting
- ESC i U C Specify busy control
- Character code
- BROTHER PT-9800PCN/9700PC ESC/P specifications
69
ESC i U B Specify baud rate
[ASCII] ESC i U B n
[Decimal] 27 105 85 66 n
[Hexadecimal] 1B 69 55 42 n
[Parameters] 0≤n≤12
[Description]
・As an RS-232C communication setting, the baud rate is specified as listed below.
If n=0 115200 bps
If n=1 600 bps
If n=2 1200 bps
If n=3 2400 bps
If n=4 4800 bps
If n=5 9600 bps
If n=6 14400 bps
If n=7 19200 bps
If n=8 28800 bps
If n=9 31250 bps
If n=10 38400 bps
If n=11 57600 bps
If n=12 115200 bps
・The setting is applied the next time that the machine is turned on.
ESC i U b Specify bit length
[ASCII] ESC i U b n
[Decimal] 27 105 85 98 n
[Hexadecimal] 1B 69 55 62 n
[Parameters] 0≤n≤1
[Description]
・As an RS-232C communication setting, the bit length is specified as listed below.
If n=1 7 bits
If n=1 8 bits
・The setting is applied the next time that the machine is turned on.