ESC/ P Command Reference

56
[1-byte decimal] 72
[1-byte decimal] 80
[1-byte decimal] 88
[1-byte decimal] 96
[1-byte decimal] 104
[1-byte decimal] 120
[1-byte decimal] 132
[1-byte decimal] 144
[1-byte decimal] 0
[1-byte decimal] 8
[1-byte decimal] 12
[1-byte decimal] 16
Vertical no. of cells: 72 cells
Vertical no. of cells: 80 cells
Vertical no. of cells: 88 cells
Vertical no. of cells: 96 cells
Vertical no. of cells: 104 cells
Vertical no. of cells: 120 cells
Vertical no. of cells: 132 cells
Vertical no. of cells: 144 cells
● ECC200 rectangular
Vertical no. of cells: AUTO (default value)
Vertical no. of cells: 8 cells
Vertical no. of cells: 12 cells
Vertical no. of cells: 16 cells
4. Horizontal size
[1-byte decimal] x
[1-byte decimal] 0
[1-byte decimal] 18
[1-byte decimal] 32
[1-byte decimal] 26
[1-byte decimal] 36
[1-byte decimal] 36
[1-byte decimal] 48
● ECC200 square
Horizontal no. of cells: Same value as vertical size (x)
● ECC200 rectangular
① When the vertical size is “AUTO”
Horizontal no. of cells: AUTO (default value)
② When the vertical size is 8 cells
Horizontal no. of cells: 18 cells
Horizontal no. of cells: 32 cells
③ When the vertical size is 12 cells
Horizontal no. of cells: 26 cells
Horizontal no. of cells: 36 cells
④ When the vertical size is 16 cells
Horizontal no. of cells: 36 cells
Horizontal no. of cells: 48 cells
5. Spare
[1-byte decimal]×5 0 5 bytes of dummy data (0) is sent.
* Note:
If the vertical size is set to a value other than those listed for ECC200 square, the “AUTO”
setting is selected. If the horizontal size is set to a value different from the vertical size, the
setting is changed to the same value as the horizontal size.
If the vertical or horizontal size for ECC200 rectangular is set to a value other than those
listed, the “AUTO” setting is selected.
② [Bar code data]: Data for the bar code
The maximum number of bar code data characters that can be entered is listed below.
2335 alphanumeric characters, 3116 numerals, 1556 bytes of binary data