User Guide

B In the Available port types list box, select “Brother P-

touch Serial Port”, and then click the New Port button.

C A dialog box appears, allowing you to select the

PTCOM port where the PT-9200DX is connected.

Select “PTCOM1:” if the P-touch is connected to the

COM1 port, or “PTCOM2:” if the P-touch is connected

to the COM2 port, and then click the OK button.

D Close the Printer Ports and the Print Server Properties

dialog boxes.

E After installation of the port monitor is finished, install

the printer driver as described below.

(3) Printer driver installation

F In the Port Selection dialog box, select “RS-232C”, and

then click the Next button.

G In the RS-232C Connection dialog box that appears,

note the path to the PT-9200DX printer driver, and

then click the Finish button.

H In the first Add Printer Wizard dialog box that appears,

click the Next button.

I In the next Add Printer Wizard dialog box, which

allows to select whether the printer is a local or

network printer, select “Local printer”, and then click

the Next button. (Also, make sure that the Plug and

Play option is not selected.)

J Select “Use the following port”, select the port chosen

in step 13 from the list, and then click the Next button.

For a serial connection With Windows® 2000

For Windows®