User guide

ERROR MESSAGE LIST
Error
Message
Cause
Remedy
4 DIGIT
MIN.
• This message appears
when less than the mini
mum four digits are
entered in a bar code.
• Enter a minimum of four
digits before pressing
NswBlocK
cs-
4 LINE
LIMIT!
• This message appears if
four lines already exist
when you press or
if you try to join a text file
recalled from the mem
ory to the current mes
sage, causing the block
to exceed the four line
limit.
• Limit the number of lines
in the current block to
, , New Block
four and press .
• This message appears if
the cursor is positioned at
the beginning of a block
Naw RInok
when you press to
join two blocks, result
ing in a block containing
a total of more than four
lines.
• Adjust the total number of
lines in the two blocks so
that they will have no
more than four lines after
they are joined, otherwise
do not try to join the two
blocks.
5 BARS
LIMIT!
• This message appears if
five bar codes already
exist when you press
Barcode . ,
or if you try to join
a text file recalled from
the memory to the cur
rent message, causing the
number of bar codes to
exceed the five bar limit.
• Limit the number of bar
codes in the text message
to five.
89