User guide

NUMBERING FUNCTION
This function can be used to print a number of copies of the same text while increasing cer
tain characters (letters or numbers) with each printed label.
To use the Numbering function:
O Press c^, or to position the cursor below the first character (letter or
number) that you wish to include in the numbering field.
O Hold down and press once. The message "SELECT FIELD" appears in the
display and the first character of the numbering field flashes.
o Press or until all characters that you wish to include in the field flash.
Up to five characters can be selected for the numbering field. If more than five
are selected, the error message "WRONG SELECT!" appears in the display.
A numbering field must be located entirely within one line of text of a single
block.
O Press . The message "NUMBER" appears in the display.
O Press or to select the number of labels that you wish to print.
O Press to begin printing the labels. The message "WORKING" appears in the dis
play just before printing begins, then the number of each copy is displayed while it is
being printed.
I®" Letters and numbers simply increase as shown below:
-> ...
0
1 -> ..
. -»
9 0
A B ... ^ Z
-» A
a
->
b
... -> 2
->
a
AO
-> A1 -> ..
. -> A9 BO
Spaces (shown as underlines (_) in the example below) can be used to adjust the
space between characters or to control the number of digits printed:
_A -»
0 ^
-> _Z
99
AA
0
O Push down on the tape cutter lever to cut the tape, then use scissors to cut along the
printed dots to separate the labels.
I® After printing using the - Tape setting, hold down (c^ and press (g) once to
feed the tape before cutting it, otherwise some of the printed characters may be
cut off.
78