Quick Reference Guide

18
Printing a label
1 Turn on the PT-1500PC and start up the computer.
2 Start up either P-touch Quick Editor or P-touch Editor Ver. 3.1, and make sure that the PT-1500PC
is selected as the printer.
3 Design your label.
4 Click the [Print] command in the application,
select the desired print settings, and then
click the Print button. The status indicator of
the PT-1500PC flashes while it is receiving
the data. After the label is printed, press in on
the tape cutter button to cut off the label.
 While printing multiple copies, the PT-
1500PC may stop printing for a short
while in order for the print head to cool
down. Printing will continue once the
print head has sufficiently cooled down.
 To feed out extra tape, hold down the
Power/Feed key for a few seconds.
Feed
3 Select the desired print settings.
Cut Marks: This option allows you to select
whether or not to print cut marks (:), which
indicate where to cut the label so that the left
and right margins are equal.
Mirror Printing: This option allows you to
print the text in reverse so it can be attached
to a window.
Copies: This option allows enter the number
of copies to be printed.
4 (Windows) Click the OK button.
(Macintosh) Click [Print]. The layout is
printed.
(Windows) To begin printing:
1 Either click the Print button ( ), or click
the arrow beside the Print button, and click
[Print] in the drop-down menu.
2 Select the desired print settings.
3 Click the OK button.
Hiding/displaying P-touch Quick
Editor (Windows only)
P-touch Quick Editor can be hidden by clicking
the Hide button ( ). Re-display P-touch Quick
Editor by clicking its icon in the system tray, at the
right of the taskbar.
Quitting P-touch Quick Editor
• (Windows) Do either of the following:
 Right-click the P-touch Quick Editor icon
in the system tray, and then click [Exit] in
the menu that appears.
 Right-click in the label view (or text box),
and then click [Exit] in the menu that
appears.
(Macintosh) Do either of the following:
 Click [Quit] in the [File] menu
 Hold down the Control key and click in
the label view (or text box), and then click
[Quit] in the menu that appears.