P.
Declaration of Conformity We BROTHER INDUSTRIES, LTD. 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan declare that the Labelling System PT-2100 conforms with the following normative documents: Safety: EN 60950-1:2001/A11:2004 (AC adapter) EMC: EN 55022:1998/A1: 2000/A2: 2003 Class B EN 55024:1998/A1: 2001/A2: 2003 EN 61000-3-2:2006 EN 61000-3-3:1995/A1: 2001 and follows the provisions of the Electromagnetic Compatibility Directive 89/336/EEC (as amended by 92/31/EEC and 93/68/EEC).
Contents BEFORE USING YOUR P-TOUCH ......................................................... 4 Safety Precautions ........................................................................................................ 4 General Precautions...................................................................................................... 8 Symbols Used in this Guide .......................................................................................... 8 GETTING STARTED ..............................
Setting Character Attributes .........................................................................................31 Setting Character Attributes by Label ....................................................................31 Setting Character Attributes by Each Line.............................................................31 Setting Auto Fit Style .............................................................................................34 Setting Label Attributes .................................
APPENDIX............................................................................................. 68 Specifications .............................................................................................................. 68 Accessories ................................................................................................................. 71 INDEX ....................................................................................................
BEFORE USING YOUR P-TOUCH Thank you for purchasing the P-touch 2100. Your new P-touch is an easy to operate, feature packed labelling system that makes creating professional, high quality labels a breeze. In addition to easy label creation via pre-formatted label layouts, the P-touch editing software features advanced label formatting, block formats, barcodes and auto-numbering functions. Safety Precautions To prevent injury and damage, important notes are explained using various symbols.
AC adapter Follow these guidelines to avoid fire, damage, electric shock, or failure. Use only the AC adapter (AD-24) designed exclusively for your P-touch. Failure to observe this may result in an accident or damage. Brother shall not assume any responsibility for any accident or damage resulting from not using the specified AC adaptor. Unplug the power cord immediately and stop using the machine during an electrical storm. There may be a remote risk of electric shock from lightning.
BEFORE USING YOUR P-TOUCH WARNING P-touch Follow these guidelines to avoid fire, damage, electric shock, and choking. Do not allow the P-touch to get wet in any way. Do not touch any metal parts near the print head. The print head becomes very hot during use and remains very hot immediately after use. Do not touch it directly with your hands. Print head Do not use the P-touch with a foreign object in it.
Do not touch the blade of the cutter unit. Do not open the tape compartment cover when operating the cutter unit. Do not apply excessive pressure to the cutter unit. z BEFORE USING YOUR P-TOUCH CAUTION Tape Cutter Follow these guidelines to avoid personal injury and damage of the P-touch. AC adaptor Be sure to disconnect the AC adapter from the power outlet and the P-touch when not using the P-touch for any extended period of time.
BEFORE USING YOUR P-TOUCH General Precautions • Do not use the P-touch in any way or for any purpose not described in this guide. Doing so may result in accidents or damage the machine. • Do not put any foreign objects into the tape exit slot, AC adapter connector, or USB port, etc. • Do not touch the print head with your fingers. Use a soft wipe (e.g. a cotton swab) when cleaning the print head or the optional print head cleaning cassette (TZ-CL4) when cleaning the print head.
GETTING STARTED Check that the package contains the following before using your P-touch.
GETTING STARTED General Description Tape viewer Tape compartment cover Tape cassette compartment Tape exit slot LCD display Keyboard Tape cutter Print head Release lever When shipped from the factory, the LCD display is covered with a protective sheet to prevent damage. Remove this sheet before using the P-touch.
z GETTING STARTED LCD Display & Keyboard LCD Display 4 5 6 7 8 9 10 1 2 3 1. Line number Displayed at the beginning of each line, this mark indicates the line number within the label layout. 2. Cursor Indicates the current position of the cursor. New characters are entered to the left of the cursor, and the character to the left of the cursor is deleted when the key is pressed. 3. Return mark Indicates the end of a line of text. 4. Caps mode Indicates that the Caps mode is on. 5.~8.
GETTING STARTED Key Names and Functions 7 8 9 10 16 1 6 2 4 3 11 15 5 17 20 14 13 1. 2. 12 (Power): Turns the P-touch on and off. ( ): Moves the cursor in the direction of the arrow when entering or editing characters, entering symbols or accented characters, and when setting label attributes in the function menus. 3. : Selects the option displayed when setting label attributes in the function menus, or when entering symbols or accented characters. 12 LCD Display & Keyboard 19 4.
(File): Opens the File menu, where you can print, open, save, or delete the frequently used labels in the file memory. 8. (Text): • Opens the Text menu, where you can set character attributes for the label. • Character attributes can be set to each line of the label when the Text menu is opened in combination with the key. 9. (Label): Opens the Label menu, where you can set label attributes for the label. 10. (Setup): • Opens the Setup menu, where you can set operating preferences for the P-touch. 11.
GETTING STARTED Power Supply Battery 1 After making sure that the power is off, remove the battery compartment cover on the back of the machine. If the batteries are already in the machine, remove them. Make sure that the power is turned off when replacing batteries. 2 Insert six new AA-size alkaline batteries (LR6), making sure that their poles point in the correct direction. 23 Always replace all six batteries at the same time using brand new ones.
z GETTING STARTED AC Adaptor 1 Insert the plug on the AC adaptor cord into the connector marked DC IN 9-9.5V on the P-touch. 2 Insert the AC adaptor plug into a standard electrical outlet. Remove the batteries if you do not intend to use the P-touch for an extended period of time. • Turn the P-touch off before disconnecting the AC adaptor. • Do not pull or bend the AC adaptor cord. For backup of memory when the AC adaptor is unplugged from the P-touch, please use AA-size alkaline batteries (LR6).
GETTING STARTED Inserting a Tape Cassette Tape cassettes of 3.5 mm, 6 mm, 9 mm, 12 mm, 18 mm width can be used in your Ptouch. Use only tape cassettes with the mark. • If the new tape cassette has a cardboard stopper, be sure to remove the stopper before inserting the cassette. N O LATI N WAT • If the ink ribbon is loose, use your finger to wind the toothed wheel in the direction of the arrow on the cassette. 1 Check that the end of the tape is not bent and that it passes through the tape guide.
z GETTING STARTED 3 Insert the tape cassette into the tape compartment, with the end of the tape facing the machine's tape exit slot, and press firmly until you hear a click. When inserting the tape cassette, make sure that the tape and ink ribbon do not catch on the print head. Tape exit slot 4 Close the tape compartment cover. • Make sure that the release lever is up when closing the tape compartment cover. The tape compartment cover cannot be closed if the release lever is pressed down.
GETTING STARTED Turning Power On/Off Press the Press the key to turn the P-touch on. key again to turn the P-touch off. • Your P-touch has a power saving function that automatically turns itself off if no key is pressed within a certain time under certain operating conditions. Refer to the Auto Power-Off Time table below for details.
Create a label with the P-touch 1 2 Prepare the P-touch. Install the batteries and/or connect the AC adaptor. Set a tape cassette. P. 14 P. 16 Turn the P-touch on. z GETTING STARTED Creating Your First Label P. 18 Enter the label text. In addition to entering text, the P-touch has a large range of editing functions. "Create labels like these" P. 25 3 Print the label. You can check the layout of your label before printing.
GETTING STARTED Create a label with your personal computer 1 Prepare the P-touch. (Refer to step 1 in the previous section.) 2 Prepare the personal computer. 3 Install the software. Connect the USB cable. Software Installation Guide Software Installation Guide Turn the P-touch on. P. 18 Enter the label text using P-touch Quick Editor. Start P-touch Quick Editor. Enter the label text in P-touch Quick Editor. For example, click on the layout area and then type "Brother".
Quick Index ABC To enter text, symbols and accent characters... This section provides quick and easy access to information on tasks often needed by users. Simply look for your task below and then go to the page indicated. If the task you are looking for is not shown here, try the Contents or Index pages. z GETTING STARTED Quick Index AB C ABC To change the label format...
GETTING STARTED Feeding Tape Feed & Cut The Feed & Cut function feeds 23 mm of blank tape then cuts the tape, which may be needed when installing a new tape cassette. 1 Hold down the key and press the "Feed & Cut?" appears on the display. 2 Select "Feed & Cut" using the or , and then press the or to feed the tape. The message "Feeding Tape... Please wait" appears while the tape is fed, and then the tape is cut. Press key. while "Feed & Cut?" is displayed to cancel tape feeding.
LCD Contrast You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1, -2) to make the screen easier to read. The default setting is "0". 1 Press the key to display the Mode menu, select "LCD Contrast" using the or key, and then press the or key. 2 Select a contrast level using the or key. The screen contrast changes each time you press the or key, allowing you to set the most suitable contrast. 3 Press the or z GETTING STARTED LCD Display key.
GETTING STARTED Setting Language and Unit Language Select the language("English", "Español", "Français", "Português","Deutsch", "Nederlands", "Italiano", "Dansk", "Svenska", "Norsk", "Suomi", "Poliski", " "Magyar" ) for menu commands and messages shown on the LCD display. The default setting is "English". 1 Press the key to display the Setup menu, select "Language" using the or key, and then press the or key. 2 Select a language using the 3 Press the Press the or or key. key.
EDITING A LABEL Using the keyboard of your P-touch is very similar to using a typewriter or word processor. Entering Text from the Keyboard • To enter a lowercase letter or a number, simply press the desired key. • To enter a blank space in the text, press the key. • To enter an uppercase letter or one of the symbols on the number keys, hold down the key and then press the desired key. • To enter uppercase letters continuously, press the key to enter Caps mode, and then press the desired keys.
EDITING A LABEL Inserting Text • To insert additional text into an existing line of text, move the cursor to the character to the right of the position where you want to start inserting text and then enter the additional text. The new text is inserted to the left of the cursor. Inserting a Tab • To insert a tab space between the existing line of text, move the cursor where you wish to add a tab and press the key to open the Setup menu, select "Tab" by using or key, and then press the or key.
In addition to the symbols available on the keyboard, there are various symbols (including international and extended ASCII characters) available with the symbol function. There are two methods of entering symbols: • Using the key. • Using the Symbol function. Entering Symbols Using z EDITING A LABEL Entering Symbols Key Symbols printed in upper-right corner of the keys on the keyboard can be entered using the key. • To enter one of these symbols, hold down the key and then press the desired key.
EDITING A LABEL zSymbol Listz Category Punctuation Business Mathematics Bracket Arrow Unit International Number Pictograph Electrical Others Symbols The use of the CE mark is strictly governed by one or more European Council directives. Ensure that any labels you produce which use this mark conform with the relevant directives.
The P-touch can display and print a set of accented characters such as other language specific characters. 1 Enter the character you wish to change to a composite character. z EDITING A LABEL Entering Accented Characters Caps mode can be used with the Accent function. 2 Press the key. The character you entered will change to an accented character. 3 Press the key repeatedly until the desired accented character is selected, or select it by using the or key.
EDITING A LABEL zAccented Character Listz Character a A c C d D e E g G i I k K l L 30 Accented Characters Entering Accented Characters Character n N o O r R s S t T u U y Y z Z Accented Characters
Setting Character Attributes by Label Using the attributes. key, you can select a font and apply size, width, style, line, and alignment 1 Press the key. The current settings are displayed. 2 Select an attribute using the or a value for that attribute using the 3 Press the or z EDITING A LABEL Setting Character Attributes key, and then set or key. key to apply the settings. New settings are NOT applied if you do not press the or key. • • • • Press the key to return to the previous step.
EDITING A LABEL zSetting Optionsz Attribute Value Result HEL (Helsinki) Font BRU (Brussels) FLO (Florida) CAL (Calgary) Auto 42pt 36pt 24pt Size 18pt 12pt 9pt 6pt 32 Setting Character Attributes When Auto is selected, the text is automatically adjusted to print in the largest size available for each tape width.
Value z EDITING A LABEL Attribute Result x2 x1 Width x2/3 x1/2 Off BLD (Bold) OUT (Outline) SHD (Shadow) SLD (Solid) Style 1 ITL (Italic) 2 I+BLD (Italic Bold) 3 4 I+OUT (Italic Outline) 5 I+SHD (Italic Shadow) 6 I+SLD (Italic Solid) 7 8 VRT (Vertical) 9 Setting Character Attributes 33
EDITING A LABEL Attribute Value Result Off UND (Underline) Line STR (Strikeout) Left Center Align (Alignment) Right Just (Justify) Setting Auto Fit Style When "Size" is set to "Auto" and "Length" is set to a specific length, you can select the way of reducing the text size to fit within the label length. When "Text Size" is selected, the total text size is modified to fit within the label. When "Text Width" is selected, the text width will be reduced to the size of x1/2 setting.
Using the key, you can create a label with a frame around the text and specify the label length and tab length. (Cut Options which may be needed when printing a label can also be set by using the key. Refer to "Tape Cutting Options" on page 53.) 1 Press the key. The current settings are displayed. 2 Select an attribute using the or a value for that attribute using the z EDITING A LABEL Setting Label Attributes key, and then set or key.
EDITING A LABEL zSetting Optionsz Attribute Value Off 1 2 3 4 5 6 Frame 7 8 9 10 11 12 13 14 36 Setting Label Attributes Result
Value z EDITING A LABEL Attribute Result 15 Frame 16 Length The length of the label can be set within the range 30 mm - 300 mm. When Auto is selected, the length of the label is automatically adjusted based on the amount of text entered. Tab Length The length of the tab can be set within the range 0 mm - 100 mm. The default setting is 50 mm.
EDITING A LABEL 4 Press the or key. The Style screen is displayed. 5 Select an attribute using the or a value for that attribute using the 6 Press the or key. The Barcode Setup screen is displayed. 7 Select an attribute using the or a value for that attribute using the key, and then set or key. key, and then set or key. The "C-Digit" attribute is only available for the CODE39, I-2/5 and CODABAR protocols. 8 Press the or key. The template text entry screen is displayed.
z EDITING A LABEL • Press the key to return to the previous step. • On the Style and Barcode Setup screens, press the key to return the selected attribute to the default value. • Refer to the Templates table for a list of available templates. key is pressed in the text entry • The "Clear All Text?" message is displayed when the screen. Press the or key to delete all text, or press the key to not delete the file.
EDITING A LABEL zTemplatesz Attribute Value Binder Spine Details (18 mm x 219 mm) File Folder Tab (12 mm x 82 mm) Divider Tab (Hanging Folder) (12 mm x 42 mm) Asset Tag (18 mm x 70 mm) Bin Box (18 mm x 76 mm) Template Name Equipment Label (18 mm x 58 mm) Faceplate (VRT) (12 mm x 70 mm) Cable Wrap (18 mm x 39 mm) Name Badge 1 (18 mm x 72 mm) Name Badge 2 (12 mm x 72 mm) 40 Using Auto-Format Layouts
Value Details CD Case Spine 1 (6 mm x 113 mm) CD Case Spine 2 z EDITING A LABEL Attribute (3.5 mm x 113 mm) Template Name VHS Spine (18 mm x 140 mm) MiniDV Spine (9 mm x 42 mm) Using Block Layouts 1 Press the key to display the Auto-Format screen, and then select "Block Layouts" using the or key. 2 Press the or key to display the Tape Width screen, and then select a tape width using the or key. 3 Press the or key.
EDITING A LABEL 6 Select an attribute using the or a value for that attribute using the Press the the default value. 7 key, and then set or key. key to set the selected attribute to Press the or key. The block layout text entry screen is displayed. Caps mode can be used when entering text. 8 9 Enter text and then press the or key. Repeat for each text field. After all text fields are completed, press the key to display the print menu.
z EDITING A LABEL zBlock Layoutsz Attribute Value Details 2LineA 2LineB 3Line 1+2LineA Block layout (18 mm tape) 1+2LineB 1+3Line 1+4Line 1+5Line 1 2 2LineA 3 4 2LineB Block layout (12 mm tape) 5 3Line 6 7 1+2Line 8 9 Using Auto-Format Layouts 43
EDITING A LABEL Attribute Value 2LineA Block layout (9 mm tape) 2LineB 1+2Line Block layout (6 mm tape) 44 Using Auto-Format Layouts 1+2Line Details
Using the Barcode function you can create labels with barcodes for use with cash registers, stock control systems or other barcode reader systems, or even asset control tags used in an asset management system. • The P-touch is not designed exclusively for creating barcode labels. Always check that barcode labels can be read by the barcode reader. • For best results, print barcode labels in black ink on white tape.
EDITING A LABEL zBarcode Settingsz Attribute Protocol Width Under# (characters printed below barcode) Value CODE39, CODE128, EAN8, EAN13, EAN128, UPC-A, UPC-E, I-2/5, CODABAR Large Small On Off Off C.Digit (check digit) On (only available for the CODE39, I-2/5 and CODABAR protocols) Entering Barcode Data 1 Press the key to display the Setup menu, select "Barcode Input" using the or key, and then press the or key. The Barcode Input screen is displayed. • Up to five barcodes can be entered in a label.
Press the or key to insert the barcode in the label. Two barcode marks are displayed on the text entry screen. • Press the key to return to the previous step. • Refer to the Special Characters List table for a list of all available settings.
EDITING A LABEL Code Special Character Code Special Character Code Special Character 17 41 FF 65 DEL 18 42 CR 66 FNC3 19 43 SO 67 FNC2 20 44 SI 68 FNC4 21 45 DLE 69 FNC1 22 46 DC1 23 47 DC2 Editing and Deleting a Barcode • To edit the barcode data position the cursor beneath either of the barcode marks on the data entry screen and then open the Barcode Input screen. Refer to "Entering Barcode Data" on page 46.
LABEL PRINTING Using the Preview function you can check the layout of the label before printing it onto the label. 1 Press the key. An image of the label is displayed on the screen. The length of the label is shown in the lower-right corner of the screen. Press the or key to scroll the preview to the left or right. Press the or key to change the magnification of the preview. z LABEL PRINTING Label Preview • Press the key to return to the text entry screen.
LABEL PRINTING Printing a Single Copy 1 Make sure that the appropriate tape cassette is inserted and ready for printing. 2 Press the key. The message shown on the right is displayed while the label is being printed. To stop printing, press the key to turn off the P-touch. There are several other messages that may appear when you press the key. Refer to "Error Messages" on page 65 and check the meaning of any messages that appear.
Using the numbering function you can create a set of sequentially numbered labels from a single label format. 1 Make sure that the appropriate tape cassette is inserted and ready for printing. 2 Hold down the key and press the key to display the print options screen, and then select "Numbering" using the or key. 3 Press the or key. The numbering start point screen is displayed. z LABEL PRINTING Auto-numbering Labels To apply auto-numbering to a barcode, select the barcode here.
LABEL PRINTING • Press the key to return to the previous step. • Unless set otherwise, the tape is automatically cut after each copy is printed. Refer to "Tape Cutting Options" on page 53 to change this setting. • The figures shown on the screen during printing indicate the "count / number of copies". • Auto-numbering can also be applied to barcodes. When a barcode contains an auto-numbering sequence, no other fields in the label can contain an auto-numbering sequence.
Tape Cutting Options z LABEL PRINTING • Press the key to return to the previous step. • Text should be printed on clear tape when using the mirror printing function. • The copy and auto-numbering functions cannot be used together with the mirror printing function. The tape cutting options allow you to specify how the tape is fed and cut when printing labels.
LABEL PRINTING zTape Cuttingz Setting Description Large Margin Automatically cuts the tape after each label is printed. The labels have a 24 mm margin on the left and right ends. Small Margin Chain No Cut • When printing labels one at a time: It automatically cuts a piece of blank tape before printing the label, and then cuts the tape after the label is printed.
You can adjust the accuracy of the printed label length in increment of -5 to +5. 1 Press the key to display the setup menu, select "Adjust Length" using the or key, and then press the or key. 2 Select "Adjust Length" by using the or key, and then set the value by using the or key. 3 Press the or z LABEL PRINTING Adjusting the Label Length Accuracy key to apply the setting. • Press the key to return to the previous step. • Press the key to set the value to default setting.
USING THE FILE MEMORY You can store up to 9 of your most frequently used labels in the file memory. Each label is stored as a file, allowing you to quickly and easily recall your label when needed again. • When the file memory is full, each time you save a file you will need to overwrite one of your stored files. • You will lose your stored files if the AC adaptor is disconnected and the batteries are removed for more than two minutes.
z USING THE FILE MEMORY Opening a Stored Label File 1 Press the 2 Select "Open" using the 3 Press the or key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the or key, and then press the or key to open the selected file. The file is opened and displayed on the text entry screen. Press the key to display the File screen. or key. key to return to the previous step.
USING THE FILE MEMORY Printing a Stored Label File 1 Press the 2 Select "Print" using the 3 Press the or key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the or key, and then press the , or key to print the selected label. The label is printed from the machine. key to display the File screen. or key. • Press the key to return to the previous step.
z USING THE FILE MEMORY Deleting a Stored Label File 1 Press the 2 Select "Delete" using the 3 Press the or key. The file number of a stored label is displayed. The label text is also displayed to identify the label. 4 Select a file number using the or key, and then press the or key. The message "Delete?" is displayed. 5 Press the or key to delete the file. The file is deleted and the screen returns to the text entry screen. Press the key to display the File screen. or key.
MAINTAINING YOUR P-touch Resetting the P-touch You can reset the internal memory of your P-touch when you want to clear all saved label files, or in the event the P-touch is not working properly. 1 Turn off the machine and then while holding down turn the machine back on. Finally, release and The P-touch turns on with the internal memory reset. Release the and . , press to key before releasing the other keys.
z MAINTAINING YOUR P-touch Cleaning the Tape Cutter Tape adhesive can build up on the cutter blade after repeated use, taking the edge off the blade which may result in the tape jamming in the cutter. About once every year, wipe the cutter blade using a cotton swab moistened with alcohol. CAUTION Do not touch the cutter blade directly with your bare hands.
TROUBLESHOOTING What to do when... Problem Cause Solution The screen ‘locks’, or Refer to "Resetting the P-touch" on page 60 and reset the the P-touch does not internal memory to the initial settings. If resetting the P-touch respond properly. does not solve the problem, disconnect the AC adaptor and remove the batteries for more than 10 minutes. The display remains Is the AC adaptor connected Check that the AC adaptor blank after turning on correctly? designed exclusively for the power.
The label is not printed correctly. The ink ribbon is separated from the ink roller. Cause Is the language set properly? Solution Refer to "Setting Language and Unit" on page 24 and select the desired language for the LCD messages. Is the tape cassette installed When installing a cassette, correctly? press firmly until it clicks into place. Is the print head clean? If not, clean the print head using a cotton swab or optional print head cleaning cassette (TZ-CL4).
TROUBLESHOOTING Problem The label is not cut automatically. Label files saved previously are now empty. 64 What to do when... Cause Solution Is Cut Option set to Chain or When these options are set, No Cut? the tape is not fed after printing the label. Check the Cut Option setting, or hold down the key and press the key to feed and cut the tape. Does the tape compartment If so, close the tape cover open? compartment cover correctly.
When an error message appears on the display, follow the directions provided below. Press any key to clear the error message. Message Cause/Remedy The installed batteries are getting weak. z TROUBLESHOOTING Error Messages The installed batteries are about to run out. Replace with new batteries or connect the AC adaptor before continuing. An incompatible AC adaptor is connected. Use only the AC adaptor designed exclusively for your P-touch.
TROUBLESHOOTING Message Cause/Remedy There are more than two lines of text when you press the or key while using 9 mm or 6 mm tape. Limit the number of lines to two, or change the tape cassette to a larger one. There is more than one line of text when you press the or key while using 3.5mm tape. Limit the number of lines to one, or change the tape cassette to a larger one. There are already five blocks of text. Limit the number of blocks to five. The maximum number of characters have already been entered.
Cause/Remedy The value entered for setting the tape length, tab length, multiple copies, or numbering function is invalid. Enter a valid value for the setting. The tape length is shorter than the total margin length set in the "Large Margin" cutting option. z TROUBLESHOOTING Message The length of the label to be printed using the text entered is longer than the length setting. Edit the text to fit within the set length or change the length setting. The text size is too large.
APPENDIX Specifications Main Unit Item Input Device (Keyboard) Display Display device Character display Back light display Printing Print method Print head Print height Print speed Tape cassette Tape cutter No.
Screen contrast Power Supply Power supply Auto Power-off Size Dimensions Weight Other Operating temperature / humidity z APPENDIX Item Memory Memory size File storage Other Features Frame Auto-Format Specification Maximum 1800 characters Maximum 9 files Total of 16 frame patterns (including shaded pattern) Templates: 14 Block layouts: 18 mm : 8, 12 mm : 4, 9 mm : 3, 6 mm : 1 5 levels (+2, +1, 0, -1, -2) AC adaptor (AD-24), Six AA-size alkaline batteries (LR6).
APPENDIX Operating Environment: Windows® Item 70 Specification OS Microsoft Windows® 2000 Professional/XP/ Windows VistaTM Memory Windows® 2000 Pro, XP: 128MB or more required Windows VistaTM: 512MB or more Hard disk 70MB or more required Monitor SVGA High colour graphics support or higher Interface USB Port (USB specification 1.
Brother recommends the use of genuine Brother accessories (tape cassettes, AC adaptor, etc.) with your P-touch. The use of other products may effect the print quality or may damage your P-touch. Availability of accessories subject to change without notice. z APPENDIX Accessories Tape Cassettes Tape supply may differ by country. Do not use tapes that do not have the mark. Laminated tapes (length: 8 m) The surface of laminated tapes is protected by a transparent film.
APPENDIX Stock No.
z APPENDIX Non-laminated tapes (length: 8 m) Stock No. 18 mm TZ-N241 TZ-N641 12 mm TZ-N231 TZ-N631 9 mm TZ-N221 6 mm TZ-N211 3.5 mm TZ-N201 Description Black characters on white tape Black characters on yellow tape Black characters on white tape Black characters on yellow tape Black characters on white tape Black characters on white tape Black characters on white tape Strong adhesive tapes (length: 8 m) Laminated tapes with stronger adhesive, ideal for rough surfaces or harsh environments. Stock No.
APPENDIX Flexible ID tapes (length: 8 m) Flexible laminated tapes ideal for labelling network cables, electrical wires, etc. Stock No.
z APPENDIX Print head cleaning cassette Cassette tape for cleaning the print head of your P-touch. Stock No. 18 mm TZ-CL4 Description Print head cleaning cassette (cleans approx. 100 times) AC Adaptor Stock No.
INDEX A R Accented Character List ....................30 accented characters ..........................29 alignment ...........................................31 Auto power-off time ...........................18 Return mark ......................................11 C Caps mode ..................................11, 25 contrast .............................................23 cursor keys ........................................25 size ....................................................31 style ...........
Printed in China LW1658001
