P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
9
(10) Non-printed character setting
The characters specified here are not printed when data is received. Specify 1 to 20
characters.
(11) Line return character setting
The line return code is used when feeding data to indicate that the following data should
be moved to the next line in a text object. One of the following four line return codes can
be selected, or 1 to 20 characters can be specified as the line return code.
1. ^CR
2. \0D\0A
3. \0A
4. \0D
(12) Number of copies setting
Specify the number of copies. A number between 1 and 99 can be specified.
Others
· ini file
After the [Set] button (in the main dialog box or the Communications Settings dialog box) is
clicked, the settings are saved when the dialog box is closed.
(MW-145BT)
C:\Documents and Settings\(user_account_name)\Application Data\Brother
\Printer Settings\Pts3532.ini
(MW-260)
C:\Documents and Settings\(user_account_name)\Application Data\Brother
\Printer Settings\Pts3432.ini
(PJ-623)
C:\Documents and Settings\(user_account_name)\Application Data\Brother
\Printer Settings\pts3236.ini
(PJ-663)
C:\Documents and Settings\(user_account_name)\Application Data\Brother
\Printer Settings\pts3436.ini