P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
7
(1) Command mode setting
· P-touch Template mode
To use P-touch Template, select the P-touch Template mode.
· ESC/P mode
· Raster mode
(2) Template number setting
Specify the template number selected as the default when the printer is turned on.
However if any number of template not be transferred to the printer, then it cannot be
specified such number of template.
(3) Delimiter setting
A delimiter is the symbol used to indicate when to move to the next object in the data
that is being sent. Between1 to 20 characters can be specified.
(4) Print start trigger setting
Select one of the following three options for the print start trigger.
· Command Character
(Printing starts when the command character specified in (5) is received.)
· Data Insertion into All the Objects
(Printing starts when the delimiter for the last object is received.)
· Received Data Size
(Printing starts when the number of characters specified in (6) is received. However,
delimiters are not counted in the number of characters.)
(5) Print start command text string setting
Specify 1 to 20 characters.
(6) Print start data amount setting
The amount of data that must be received before printing can begin can be set between
1 and 999.