P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
5
How to use P-touch Template
1. Printer setting
Set up the initial printer setting by P-touch Template settings
tool, in accordance with the environment of host system
or the terminal unit, which MW-145BT/MW-260/PJ-623/PJ-663
connect to.
(Please refer to
HP-touch Template Settings Tool User’s Guide in page 6.)
The printer driver must first be installed via a USB connection.
2. Design the template
Design the transferred template by P-touch Editor
(Please refer to P-touch Template Limitations
in page 11.)
3. Transfer the templates
Transfer the templates to the printer by
P-touch transfer manager.
(Please refer to MW-Series/PockeJet Software User’s Guide.)
4. Program by P-touch template commands
If any special commands are required to control
the printer, change the terminal program in accordance
with the P-touch Template Command Reference.
(Please refer to P-touch Template Command Reference
.)
5. Connect the printer with the terminal unit and print
slips etc.
Transfer the data such as ASCII text from the terminal unit
to templates in the
printer, and print the slips etc.
*Printer image in the screen
may differ depending on
your product model.