P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
25
^OS Specify object selection (object number)
[ASCII] ^ O S n1 n2 n3
[Decimal] 94 79 83 nd1 nd2 nd3
[Hexadecimal] 5E 4F 53 nh1 nh2 nh3
[Parameters] 0≤n1≤2
0≤n2≤9
0≤n3≤9
[Description]
· Selects an object by its object number.
(n1*100) + (n2*10) + n3: Object number (1 to 200)
[Remarks]
· The object number can be set between 1 and 200. This is invalid when an attempt is
made to specify a value other than these.
· Use this command to insert data from an intermediary object.
[Example]
· To select the 33rd object:
^ O S 0 3 3 (5Eh 4Fh 53h 30h 33h 33h)
^ON Specify object selection (object name)
[ASCII] ^ O N data 00
[Decimal] 94 79 78 datad 00
[Hexadecimal] 5E 4F 4E datah 00
[Parameters] None
[Description]
· Selects an object by its object name.
data: Text string (object name)
[Remarks]
· The maximum length of text that can be set is 20 characters. If text longer than this is
specified, the command is invalid. In addition, the command is invalid if no text is
specified.
· “00h” should be added at the end of the text. This indicates the end of the text.
· Use this command to insert data starting with an intermediary object.
[Example]
· To select an object with the name “TEXT1”:
^ O N T E X T 1 00h
(5Eh 4Fh 4Eh 54h 45h 58h 54h 31h 00h)