P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
22
*1：00 Hex if no media is loaded.
Model codes
Model name Value
PJ-622 ‘1’ Char (31 Hex)
PJ-623 ‘2’ Char (32 Hex)
PJ-662 ‘3’ Char (33 Hex)
PJ-663 ‘4’ Char (34 Hex)
Error information 1
Flag Mask Definition
Bit 0 0x01 Not used
Bit 1 0x02 “End of media” error
Bit 2 0x04 Not used
Bit 3 0x08 Battery empty
Bit 4 0x10 Not used
Bit 5 0x20 Not used
Bit 6 0x40 Not used
Bit 7 0x80 Not used
Error information 2
Flag Mask Definition
Bit 0 0x01 Not used
Bit 1 0x02 Not used
Bit 2 0x04 Not used
Bit 3 0x08 Not used
Bit 4 0x10 Not used
Bit 5 0x20 Not used
Bit 6 0x40 Not used
Bit 7 0x80 Not used
Media type
Media type Value Remarks
None
00 Hex No media
Yes
01 Hex There is media.
Status type
Status type Value
Reply to status request 00 Hex
Printing completed 01 Hex
Error occurred 02 Hex
Turned off 04 Hex
Notification 05 Hex
Phase change 06 Hex