P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
4
Introduction
This material provides the necessary information for directly controlling the transferred
templates in MW-145BT/MW-260/PJ-623/PJ-663.
This information is provided assuming that the user has full understanding of the operating
system being used and basic mastery of programming in a developer's environment.
We accept no responsibility for any problems caused by programs that you develop using
the information provided in this material, affecting software, data or hardware, including the
MW-145BT/MW-260/PJ-623/PJ-663, and any problems resulting directly or indirectly from
them. Use this material only if you accept these terms.
This material shall not be reproduced, in part or in full, without prior approval. In addition,
this material shall not be used as evidence in a lawsuit or dispute in a way that is
unfavorable towards our company.
What is P-touch Template?
P-touch Template is the tool to transfer the ASCII
text & binary data from a terminal unit to
transferred template in the printer. Such
transferred data is inserted into text object or
barcode object in a template.
It helps the user develop the printing system which connects directly from the terminal
unit. The types of terminal unit are as below.
Smartphone
Handy terminal etc.
Notes:
*P-touch Template is not compatible with some terminal units.
*Terminal unit should have an interface to transfer the data.
3
.
T
rans
f
er t
h
e
d
ata
(Text) from the terminal
unit, and print template.
1
.
S
ett
i
ng up t
h
e pr
i
nter
through your PC,
in accordance with the
terminal unit.
2. Design the template
by P-touch Editor, and
transfer it to printer.