P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
10
About P-touch Template
Data can be sent from a host (such as measuring instruments, scales and bar code
readers) and printed in a template previously transferred to the machine from P-touch
Editor.
P-touch Template commands used in P-touch Template mode (except ESC i a) consist of
a prefix character and a two-character text string. When the prefix character is sent, the
machine begins the analysis of the P-touch Template command, and performs the
specified process if the following two-character text string corresponds to a command.
Static and dynamic commands
With static commands, items specified with a setting command are saved and stored in
the memory.
With dynamic commands, items specified with a setting command are temporarily saved
and applied until the machine is turned off.
If printing does not begin (main most frequent causes)
1) The command mode is not in the P-touch Template mode.
2) The conditions for the print start trigger are not met.
The following three types of print start triggers exists, but this selection is incorrect.
i) When the specified text string is received
ii) When all objects are filled
iii) When the specified number of characters is received
If the settings described above are incorrect, use the machine setting tool to specify the
settings.