P-touch Template Manual/ Command Reference

9
Commands that can be set or obtained in maintenance mode
ESC iXT2 1B 69 58 54 32
Static
Select print start trigger
ESC iXP2 1B 69 58 50 32
Static
Specify print start command text string
ESC iXr2 1B 69 58 72 32
Static
Specify print start received character count
ESC iXD2 1B 69 58 44 32
Static
Specify delimiter
ESC iXa2 1B 69 58 61 32
Static
Specify Non-Printed character text strings
ESC iXi2 1B 69 58 69 32
Static
Specify command mode
ESC iXn2 1B 69 58 6E 32
Static
Select template
ESC iXf2 1B 69 58 66 32
Static
Change prefix character
ESC iXm2 1B 69 58 6D 32
Static
Select character code set
ESC iXj2 1B 69 58 6A 32
Static
Specify international character set
ESC iXR2 1B 69 58 52 32
Static
Specify line return command text string
ESC iXC2 1B 69 58 43 32
Static
Specify number of copies
ESC iXT1 1B 69 58 54 31 Retrieve select print start trigger items
ESC iXP1 1B 69 58 50 31 Retrieve print start command setting text
string
ESC iXr1 1B 69 58 72 31 Retrieve print start received character count
ESC iXD1 1B 69 58 44 31 Retrieve delimiter
ESC iXa1 1B 69 58 61 31 Retrieve Non-Printed character text strings
ESC iXi1 1B 69 58 69 31 Retrieve command mode
ESC iXn1 1B 69 58 6E 31 Retrieve template selection number
ESC iXm1 1B 69 58 6D 31 Retrieve character code set setting
ESC iXj1 1B 69 58 6A 31 Retrieve international character set setting
ESC iXf1 1B 69 58 66 31 Retrieve prefix setting character
ESC iXR1 1B 69 58 52 31 Retrieve line return command setting text
string
ESC iXC1 1B 69 58 43 31 Retrieve number of copies
* The commands mentioned above must be used in maintenance mode.
They cannot be used in raster mode, ESC/P mode or P-touch Template mode.