P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
4
4. Transfer.
You may not sell, assign, rent, lease or otherwise transfer the Software to any person.
5. Reverse Engineering.
Except and to the limited extent as may be otherwise specifically provided by any laws or
rules applicable in certain country, state or region you resides, User may not reverse
engineer, disassemble or decompile the Software (other than Redistributable Module II) nor
otherwise transform the same into human-readable.
6. Term and Termination
a. This Agreement will become effective upon User’s acceptance thereof and shall continue
in effect, unless the parties agree to expire this Agreement.
b. Notwithstanding Section 6a above, Brother may terminate this Agreement upon the
following cause:
(a) User breaches any of the provisions hereof,
(b) Otherwise Brother has reasonable ground for termination.
In case of such termination, User shall have an obligation to collect any and all copies of
the Software (and any components thereof) and completely erase the same.
7. User’s Information.
User may at its sole discretion provide Brother with its suggestions or other technical
information relating to the Software. User agrees and acknowledges that such information
is provided voluntarily, and that Brother may freely use such information at its sole discretion.
Brother agrees not to disclose or divulge User’s name or other identification as the source of
such information.
8. Export Regulations.
You may not export or re-export the Software or any portion thereof in violation of any
applicable laws or regulations.
9. Support.
(a) For the Software. Brother will at its sole discretion provide support services for the
Software, including support for inquiries about function or usage thereof or advice for
programming technique using the Software. In no way Brother shall be obliged to
provide such support services.
(b) For UASoftware. User shall at its sole costs and expense provide end users any and all
support services relating to UASoftware (including any Redistributable Modules
incorporated therein). Brother shall not have any obligation to provide end users support