P-touch Template Manual/ Command Reference
Table Of Contents
- P-touch Template Manual
- P-touch Template Command Reference
- Control Code List
- About P-touch Template
- Static and dynamic commands
- If printing does not begin (main most frequent causes)
- Control Command Details
- ^PT Specify print start trigger selection
- ^PS Specify print start command text string
- ^PC Specify print start received character count
- ^SS Specify delimiter
- ^TS Specify template selection
- ^LS Specify line spacing with line return
- ^CC Change the prefix character
- ^RC Specify line return command text string
- ^CN Specify number of copies
- ^II Initialize
- ^SR Status request
- ^VR Retrieve version Information
- ^CR Line return in object
- ^OS Specify object selection (object number)
- ^ON Specify object selection (object name)
- ^DI Direct object insertion
- ESC ia Specify command mode
- ESC iXT2 Specify print start trigger selection
- ESC iXP2 Specify print start command text string
- ESC iXr2 Specify print start received character count
- ESC iXD2 Specify delimiter
- ESC iXa2 Specify Non-Printed character text strings
- ESC iXi2 Specify command mode
- ESC iXn2 Specify template selection
- ESC iXf2 Change the prefix character
- ESC iXm2 Select character code set
- ESC iXj2 Specify international character set
- ESC iXR2 Specify line return command text string
- ESC iXC2 Specify number of copies
- ESC iXT1 Retrieve select print start trigger items
- ESC iXP1 Retrieve print start command setting text string
- ESC iXr1 Retrieve print start received character count
- ESC iXD1 Retrieve delimiter
- ESC iXa1 Retrieve Non-Printed character text strings
- ESC iXi1 Retrieve command mode setting
- ESC iXn1 Retrieve template selection number
- ESC iXm1 Retrieve character code set
- ESC iXj1 Retrieve international character set setting
- ESC iXf1 Retrieve the prefix character
- ESC iXR1 Retrieve line return command setting text string
- ESC iXC1 Retrieve number of copies
- Character code
- International character set table
22
Appendix: Specifications
BROTHER MW-145BT/MW-260/PJ-623/PJ-663 P-touch Template specifications
Printing method [MW-145BT/MW-260]
Raster printing (PTCBP mode)
ESC/P printing
P-touch Template printing
[PJ-623/PJ-663]
Raster printing (PTCBP mode)
ESC/P printing
P-touch Template printing
Maintenance printing
Resolution (dpi) 300 dpi × 300 dpi
Font
Bitmap fonts: Helsinki, Brussels, Letter Gothic Bold
Outline fonts: Helsinki, Brussels, Letter Gothic
Size (dots) Bitmap fonts: 24 x 24, 32 x 32 (dots)
Outline fonts: 33 - 400 dot (22sizes)
Character style None, Bold, Italics, Outline, Shadow, Shadow + Outline
Horizontal
alignment
Left, Center, Right
Tex t
Rotate Portrait, landscape
Protocols *1 CODE39, ITF (I-2/5), EAN-13, EAN-8, UPC-A, UPC-E, CODABAR,
CODE-128, GS1-128 (UCC/EAN-128), QR Code (model 1, model 2,
micro QR), PDF417 (Standard, Truncate), DataMatrix (ECC200
Square, ECC200 Rectangular)
Bar code
Width Large, Medium, Small, Extra Small
*1 BarStar Pro Encode Library (DataMatrix, MaxiCode, PDF417, RSS) Copyright © 2007 AINIX
Corporation.
All rights reserved.
QR Code is registered trademark of DENSO WAVE INCORPORATED in JAPAN and other
countries.
QR Code Generating Program Copyright © 2008 DENSO WAVE INCORPORATED
Printing