All in One Printer User Manual
Table Of Contents
- Quick Setup Guide MFC-8890DW
- Start Here
- 1 Unpack the machine and check the components
- 2 Install the drum unit and toner cartridge assembly
- 3 Load paper in the paper tray
- 4 Release the scanner lock
- 5 Connect the power cord and telephone line
- 6 Set your country (for Australia/New Zealand customer only)
- 7 Choose a Receive Mode
- 8 Set the LCD contrast (If needed)
- 9 Set the date and time
- 10 Enter personal information (station ID)
- 11 Fax Transmission Report
- 12 Set tone or pulse dialling mode (not available in New Zealand)
- 13 Dial Prefix
- 14 Set Daylight Saving Time
- 15 Choose your connection type
- For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- For USB Interface Users (Mac OS® X 10.3.9 or greater)
- For Parallel Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition)
- For Wired Network Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®)
- For Wired Network Interface Users (Mac OS® X 10.3.9 or greater)
- For Wireless Network Interface Users
- For Network Users
- Options and Consumables
- brother ARL/ASA/NZ
- Start Here
4
2
Install the drum unit and
toner cartridge assembly
a Remove the protective tape and film covering
the scanner glass.
b Press the front cover release button and open
the front cover a.
c Unpack the drum unit and toner cartridge
assembly.
d Gently shake it from side to side several times
to distribute the toner evenly inside the
assembly.
e Put the drum unit assembly into the machine
until it clicks into place.
f Close the front cover of the machine.
IMPORTANT
DO NOT connect the interface cable yet.
1