Startup : Reference Guide

72
Practical Application h
Icon design - Creating an original design by combining shapes -
Creating Various Embroidery Designs
7 In the [Sewing Order] pane, hold
down the <Shift> key, and click
frame 3 (a), then frame 6 (b).
 Frames 3, 4, 5 and 6 are selected.
8 Click (c).
 The two circles are selected.
9 Apply hole sewing to the two
selected circles as described in
step
5.
10 Arrange the smaller circle inside the
black circle, and then specify the
following settings.
Line sew type Zigzag Stitch
Region sew type Fill Stitch
Line color BLACK
Region color WHITE
Direction
Manual
straight line,
0 degree
11 Repeat steps 7 and 8 to select the
innermost circle and the black circle
immediately outside of it.
12 Apply hole sewing to the two
selected circles as described in
step
5.
c
a
b