Startup : Reference Guide

71
Practical Application h
Icon design - Creating an original design by combining shapes -
3 In the [Sewing Attributes] pane, set
[Manual straight line] under
[Direction] to "135" degrees.
4 Select both shapes.
5 In the [Home] tab, click [Modify
Overlap] in the [Edit] group, and
then select [Set hole sewing] under
[Hole sewing].
 The overlapping area of the two
shapes will not be sewn twice (only
the inner circle will be sewn). This is
called hole sewing.
6 Add [BS_shapes01.pes] to the
center of the white circle, and then
specify the following settings for the
sew types, colors and angle.
Line sew type Zigzag Stitch
Region sew type Fill Stitch
Line color BLACK
Region color BLACK
Direction
Manual
straight line,
90 degrees