Startup : Reference Guide

67
Practical Application h
Icon design - Creating an original design by combining shapes -
2 Select pattern [BS_shapes02.pes],
and then drag it into the [Design
Page].
You can also select shapes by clicking
[Shapes] in the [Tools] group on the
[Home] tab.
3 Adjust the shape as shown to draw
the camera body.
a While holding down the <Shift> key,
drag the handle at the center of the
right side to the right in order to enlarge
the shape equally to both the left and
right.
b Drag the handle at the center of the top
edge up in order to increase the height.
4 On the [Home] tab, click [Select] in
the [Select] group, and then click
(Select Point).
5 Click three places on the top edge of
the rectangle, as shown, to add
points.
b
a