Startup : Reference Guide

63
Practical Application g
Symbol – Specifying the sewing direction for each separate shape –
6 Drag each point on the direction line
(red curve) to specify your desired
curve of sewing for the right side of
the pattern part.
7 Repeat steps 4 through 6 to specify
the sewing directions for the upper-
left section of the pattern.
8 Using , select the lower-right
section of the pattern.
9 Drag each end of the direction line
(arrow) to specify the sewing
direction.
The sewing direction is specified from
the end to the point of the direction line.
10 Click the [Shapes] tab, and then
click [Add Direction Line] in the
[Sewing Direction Line] group.
 A direction line (arrow) for
specifying the sewing direction can
be added.