Startup : Reference Guide

5
Installation
• Keep the "PE-DESIGN Software Key" away from high humidity, direct sunlight, static electricity and strong
shocks. Furthermore, do not bend the "PE-DESIGN Software Key".
• Before installing, back up the installer stored on the "PE-DESIGN Software Key".
• If the installed application is not operating properly, perform the installation again.
• Before activating the "PE-DESIGN Software Key", run [PE-DESIGN 10 (Layout & Editing)] as an
administrator. (c page 10)
Installation
Please Read Before Installation
• Before beginning the installation, check that the computer meets the system requirements.
• In order to install the software on Windows
®
operating system, you must log on to the computer using an
account with administrator privileges. For details on logging on to the computer using an account with
administrator privileges, refer to the Windows manual.
• The installation procedure is described for Windows
®
8.1. The procedure and dialog boxes for other
operating systems may be slightly different.
• If the installation is canceled before it is completed or if the procedure is not performed as described, the
software will not be installed correctly.
• Do not unplug the "PE-DESIGN Software Key" from the computer while the LED indicator is flashing.
• Do not remove the "PE-DESIGN Software Key" from the USB port of the computer while the installation is
being performed. Remove the "PE-DESIGN Software Key" after the installation is completed.
• In order to activate the "PE-DESIGN Software Key", you must be able to connect to the Internet. If you
cannot connect to the Internet, contact your authorized dealer or Brother Customer Service.
• In order to activate the "PE-DESIGN Software Key", be sure to perform “[STEP2] Activating the "PE-
DESIGN Software Key" (only for users upgrading from PE-DESIGN version 5, 6, 7, 8 or NEXT)” on page 9.
System Requirements
Before installing the software on your computer, make sure that the computer meets the following minimum
PC requirements.
Operating system Windows Vista
®
, Windows
®
7, 8, 8.1 (32 or 64 bit)
Processor 1 GHz or more
Memory 512 MB (1 GB or more is recommended.)
Hard disk free space 300 MB
Monitor XGA (1024 × 768), 16-bit color or higher
Port
Two or more USB ports (used for connecting the "PE-DESIGN Software
Key" and for transferring embroidery data to an embroidery machine)
Device Mouse
Printer
Graphic printer that is supported by your system (if you wish to print your
images)
Internet access Required for activating and updating PE-DESIGN
a
• This product may not operate correctly with some computers.