Label Printer Quick Reference
Table Of Contents
- PT9500PC_Ca-E_Ca-Fr.pdf
- English
- Introduction
- Table of Contents
- 1 Before use
- 2 Installing the software
- 3 Creating labels: Windows version
- 4 Creating labels: Macintosh version
- 5 Appendix
- French
- Introduction
- Table des matières
- 1 Avant l'utilisation de l'imprimante
- 2 Installation du logiciel
- Types de logiciels utilisés
- Sous Windows
- Précautions relatives à l'installation
- Installation de base
- Installation du logiciel P-touch Editor uniquement
- Installation du logiciel P-touch Quick Editor uniquement
- Installation du pilote d'imprimante uniquement
- Réglage de la vitesse de transmission du PC et de la PT-9500PC
- Désinstallation du logiciel
- L'imprimante n'est plus utilisée
- Sous Mac OS 8.6-9.x
- Sous Mac OS X 10.1 ou version ultérieure
- 3 Création d'étiquettes : version Windows
- 4 Création d'étiquettes : version Macintosh
- 5 Annexes
- English
41
Installing the
software
8
Click [Next].
→
The dialog box to indicate
installation is complete appears.
9
Remove the CD-ROM from the CD-ROM
drive.
0
Select “Yes, I want to restart my
computer now.”, and then click [Finish].
→
Installation of the printer driver is
complete, and the personal
computer will restart.
a
Set up the PS-9000 print server.
For PS-9000 setup, refer to the instruction
manual for the PS-9000 print server.
Setting the personal
computer and PT-9500PC
baud rate
Follow the following steps to change or confirm
the baud rate for the personal computer and the
PT-9500PC. The following procedure is shown
based on Windows
®
XP.
1
On the taskbar, click the Start button,
and then click Control Panel
→
Control Panel appears.
For Windows
®
95/98/98SE/Me/NT 4.0/
2000 Pro
On the taskbar, click the Start button, point
to Settings, click Control Panel, and then
double-click the Printer icon. Proceed to
step
4
.
2
Select “Printers and Other Hardware”.
→
The Printers and Other Hardware
window appears.