Label Printer Quick Reference
Table Of Contents
- PT9500PC_Ca-E_Ca-Fr.pdf
- English
- Introduction
- Table of Contents
- 1 Before use
- 2 Installing the software
- 3 Creating labels: Windows version
- 4 Creating labels: Macintosh version
- 5 Appendix
- French
- Introduction
- Table des matières
- 1 Avant l'utilisation de l'imprimante
- 2 Installation du logiciel
- Types de logiciels utilisés
- Sous Windows
- Précautions relatives à l'installation
- Installation de base
- Installation du logiciel P-touch Editor uniquement
- Installation du logiciel P-touch Quick Editor uniquement
- Installation du pilote d'imprimante uniquement
- Réglage de la vitesse de transmission du PC et de la PT-9500PC
- Désinstallation du logiciel
- L'imprimante n'est plus utilisée
- Sous Mac OS 8.6-9.x
- Sous Mac OS X 10.1 ou version ultérieure
- 3 Création d'étiquettes : version Windows
- 4 Création d'étiquettes : version Macintosh
- 5 Annexes
- English
16
Connecting to a personal computer
Connect the PT-9500PC to a personal computer using the included interface cables. The interface
cables used to connect to a USB port and a serial port are different.
Note
● Do not connect both the serial interface cable and USB interface cable to the PT-9500PC at the
same time. The PT-9500PC may malfunction.
Note
● Do not connect the USB interface cable to a personal computer until the software has been installed.
● If the USB interface cable is connected to a personal computer before the software is installed,
the following dialog box will appear. Click [Cancel], and then remove the USB interface cable.
Windows
®
95/NT4.0
Windows
®
98/98 SE/
Me/2000 Pro/XP
Mac OS 8.6-9.x
Mac OS X 10.1-10.2.6
Advanced setup Basic setup
Connect to serial port. Connect to USB port.