Label Printer Quick Reference
Table Of Contents
- PT9500PC_Ca-E_Ca-Fr.pdf
- English
- Introduction
- Table of Contents
- 1 Before use
- 2 Installing the software
- 3 Creating labels: Windows version
- 4 Creating labels: Macintosh version
- 5 Appendix
- French
- Introduction
- Table des matières
- 1 Avant l'utilisation de l'imprimante
- 2 Installation du logiciel
- Types de logiciels utilisés
- Sous Windows
- Précautions relatives à l'installation
- Installation de base
- Installation du logiciel P-touch Editor uniquement
- Installation du logiciel P-touch Quick Editor uniquement
- Installation du pilote d'imprimante uniquement
- Réglage de la vitesse de transmission du PC et de la PT-9500PC
- Désinstallation du logiciel
- L'imprimante n'est plus utilisée
- Sous Mac OS 8.6-9.x
- Sous Mac OS X 10.1 ou version ultérieure
- 3 Création d'étiquettes : version Windows
- 4 Création d'étiquettes : version Macintosh
- 5 Annexes
- English
102
Maintenance
The internal parts of the PT-9500PC will gradually become dirty with use. This section contains the
procedures for maintaining the PT-9500PC.
Label is not printed clearly
If the printed label contains a blank horizontal
line or the characters are not clear, the print
head and head roller may be dirty.
■
Self-cleaning
Use the PT-9500PC self-cleaning function to
remove any dirt from the print head.
1
Press the cover release button and open
the tape compartment cover.
2
Remove the tape cassette.
3
Close the tape compartment cover.
4
Press the feed/cut button.
→
Self-cleaning will start.
5
Press the cover release button and open
the tape compartment cover.
After the rollers stop, press the cover
release button.
6
Install the removed tape cassette, and
then close the tape compartment cover.
Feed & Cut button