Quick Start Manual
Table Of Contents
- Contents
- Before Using
- Getting Started
- Introduction
- About this Chapter
- Using the Auto Punch Function
- Using Design Center
- Using Layout & Editing
- Step 1 Starting Layout & Editing
- Step 2 Importing Embroidery Patterns from Design Center
- Step 3 Zooming In and Out
- Step 4 Moving the Embroidery Pattern
- Step 5 Adding an Oval
- Step 6 Adjusting the Size and Location of the Oval
- Step 7 Adding Text
- Step 8 Fitting the Text around the Oval
- Step 9 Moving the Oval and Text
- Step 10 Adding a Circle for Drawing the Sun
- Step 11 Selecting a Programmable Fill Stitch
- Step 12 Adding Broken Lines for Drawing the Sun Rays
- Step 13 Changing the Sewing Order of Sun and Rays
- Step 14 Adjusting the Rays
- Step 15 Setting Hole Sewing
- Step 16 Previewing the Sewing Image
- Step 17 Transferring the Data to a Card
- Step 18 Saving the File
- Using Programmable Stitch Creator
- Creating data for the multi-position frame
- Design Center
- The Screen
- Using the Stage 2 Tool Box
- Using the Stage 3 Tool Box
- Using the Stage 4 Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- Layout & Editing
- The Screen
- Using the Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- File Menu
- Edit Menu
- Image Menu
- Input – from File
- Input – from TWAIN device
- Input – from Portrait
- Input – from Clipboard
- Output – to File
- Output – to Clipboard
- Select TWAIN device
- Modify
- Image to Stitch Wizard
- If Auto Punch is selected:
- If Photo Stitch 1 (Color) is selected:
- [Manual Color Selection]
- If Photo Stitch 1 (Mono) is selected:
- If Photo Stitch 2 (Color) is selected:
- If Photo Stitch 2 (Mono) is selected:
- If Cross Stitch is selected:
- Display Image – On/Faded/Off
- Text Menu
- Sew Menu
- Display Menu
- Option Menu
- Help Menu
- Programmable Stitch Creator
- Quick Reference
- Alphabetic Index
246
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
■ Delete
Purpose: Removes the selected line(s) from the screen without saving them in the clip-
board.
Shortcut key:
Toolbar: No button for this function
Operation:
1 Select one or more lines.
2 Click Edit, then Delete.
The selected line(s) are removed from the screen. Since they are not saved in the clipboard, the
only way to make them reappear is to use
Edit - Undo.
See also: “Undo” on page 244 and “Cut” on page 245
■ Mirror – Horizontal
Purpose: Flips the selected line(s) up/down.
Shortcut key: +
Toolbar:
Operation:
1 Select one or more lines.
2 Click Edit, then Mirror, then Horizontal.
The selected line(s) are replaced by their horizontal mirror image (top and bottom inverted). Two
successive applications of this function restores the original image.
See also: “Mirror – Vertical” and “Rotate” below
■ Mirror – Vertical
Purpose: Flips the selected line(s) left/right.
Shortcut key: +
Toolbar:
Operation:
1 Select one or more lines.
2 Click Edit, then Mirror, then Vertical.
The selected line(s) are replaced by their vertical mirror image (left and right inverted). Two suc-
cessive applications of this function restores the original image.
See also: “Mirror – Horizontal” above and “Rotate” below
■ Rotate
Purpose: Allows you to manually rotate the selected line(s) by an arbitrary angle.
Shortcut key: +
Toolbar:
Delete
Ctrl H
Ctrl J
Ctrl Y