Quick Start Manual
Table Of Contents
- Contents
- Before Using
- Getting Started
- Introduction
- About this Chapter
- Using the Auto Punch Function
- Using Design Center
- Using Layout & Editing
- Step 1 Starting Layout & Editing
- Step 2 Importing Embroidery Patterns from Design Center
- Step 3 Zooming In and Out
- Step 4 Moving the Embroidery Pattern
- Step 5 Adding an Oval
- Step 6 Adjusting the Size and Location of the Oval
- Step 7 Adding Text
- Step 8 Fitting the Text around the Oval
- Step 9 Moving the Oval and Text
- Step 10 Adding a Circle for Drawing the Sun
- Step 11 Selecting a Programmable Fill Stitch
- Step 12 Adding Broken Lines for Drawing the Sun Rays
- Step 13 Changing the Sewing Order of Sun and Rays
- Step 14 Adjusting the Rays
- Step 15 Setting Hole Sewing
- Step 16 Previewing the Sewing Image
- Step 17 Transferring the Data to a Card
- Step 18 Saving the File
- Using Programmable Stitch Creator
- Creating data for the multi-position frame
- Design Center
- The Screen
- Using the Stage 2 Tool Box
- Using the Stage 3 Tool Box
- Using the Stage 4 Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- Layout & Editing
- The Screen
- Using the Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- File Menu
- Edit Menu
- Image Menu
- Input – from File
- Input – from TWAIN device
- Input – from Portrait
- Input – from Clipboard
- Output – to File
- Output – to Clipboard
- Select TWAIN device
- Modify
- Image to Stitch Wizard
- If Auto Punch is selected:
- If Photo Stitch 1 (Color) is selected:
- [Manual Color Selection]
- If Photo Stitch 1 (Mono) is selected:
- If Photo Stitch 2 (Color) is selected:
- If Photo Stitch 2 (Mono) is selected:
- If Cross Stitch is selected:
- Display Image – On/Faded/Off
- Text Menu
- Sew Menu
- Display Menu
- Option Menu
- Help Menu
- Programmable Stitch Creator
- Quick Reference
- Alphabetic Index
209
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
H-Arrange
(Horizontal Arrange)
Sets the horizontal arrangement of the
pattern. For patterns like , patterns will
be arranged along the line as shown
below.
V-Arrange
(Vertical Arrange)
Sets the vertical arrangement of the pat-
tern. For patterns like , patterns will be
arranged along the line as shown below.
Row Offset
When the pattern arrangement is offset, sets the amount of
offset for each row.
Range: 0 - 10 mm (0.06 - 0.20 inch)
Default: 0 mm (0.10 inch)
Direction
Allows you to rotate the angle of the Motif patterns.
Range: 0 - 359 degrees
Default: 0 degrees
Run Pitch
Sets the pitch of the sewing.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 2 mm (0.08 inch)
Cross stitch only:
Size
Sets the horizontal and vertical size of the pattern.
Range: 1.5 - 5 mm (0.06 - 0.20 inch)
Default: 2.5 mm (0.10 inch)
Times
Sets the number of times that the pattern will be sewn. Sews
twice per time.
Range: Single, Double, Triple
Default: Single
Feathered Edge only:
Feathered Side
Sets which side of the sewing direction to apply the Feathered
edge setting to.
When creating data in Manual Punch mode, the Topside has
organization points 1-3, and the Bottom side has organization
points 2-4.
Top: Feathered Edge is sewn on the Topside.
Bottom: Feathered Edge is sewn on the Bottomside.
Pattern
Selects a pattern to use with the Feathered Edge.
Click
Select Pattern, and the Browse dialog will open.
Scroll through the available Feathered Edge patterns and dou-
ble-click the desired pattern or click OK to select the pattern
Max length
Sets the length of feathered edge.
Range: 0.2 - 100 mm (0.01 - 3.94 inch)
Default: 3 mm (0.12 inch)
Normal:
Mirror:
Alternate:
Normal:
Mirror:
Alternate: