Quick Start Manual

208
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
Fill stitch only:
Step Pitch
Sets the pitch of the steps.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 4 mm (0.16 inch)
Frequency
Sets the spacial frequency steps.
Range: 0 - 99%
Default: 30%
Programmable fill stitch only:
Pattern
Select a pattern for Programmable Fill Stitch.
Click Select Pattern, and the Browse dialog opens. Select the
folder containing the pas file you want to open. Scroll through
the available stitch patterns and double-click the desired pat-
tern or click OK to select the pattern
Pattern Size
Width
Sets the stitch pattern width.
Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)
Height
Sets the stitch pattern height.
Range: 5 - 10 mm (0.20 - 0.39 inch)
Default: 7.5 mm (0.30 inch)
Offset
Direction
Sets the offset arrangement of the pattern, and sets the direc-
tion of offset as Row/Column.
Value
When the pattern’s arrangement is offset, sets the amount of
offset.
Range: 0 - 99%
Default: 0%
Direction
Allows you to rotate the angle of the stitch patterns.
Range: 0 - 359 degrees
Default: 0 degrees
Motif Stitch only:
Use Pattern
Selects whether to use pattern 1 or pattern 2 for Motif. If you
choose to use both patterns, the data is created so that sewing
is alternated between them after each row.
Pattern1 only: Uses only pattern 1 (Default)
Pattern2 only: Uses only pattern 2
Pattern1 and 2: Uses pattern 1 and pattern 2
Pattern
Select a pattern for Motif sewing.
Click Select Pattern, and the Browse dialog will display. Select
the folder containing the pmf file you want to open. Scroll
through the available stitch patterns and double-click the
desired pattern or click OK to select the pattern.
Pattern Size
Width
Sets the pattern width (the direction along the line).
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
Height
Sets the pattern height (the direction perpendicular to the line).
Range: 2 - 10 mm (0.08 - 0.39 inch)
Default: 5 mm (0.20 inch)
Step pitch
0%
30%