Quick Start Manual
Table Of Contents
- Contents
- Before Using
- Getting Started
- Introduction
- About this Chapter
- Using the Auto Punch Function
- Using Design Center
- Using Layout & Editing
- Step 1 Starting Layout & Editing
- Step 2 Importing Embroidery Patterns from Design Center
- Step 3 Zooming In and Out
- Step 4 Moving the Embroidery Pattern
- Step 5 Adding an Oval
- Step 6 Adjusting the Size and Location of the Oval
- Step 7 Adding Text
- Step 8 Fitting the Text around the Oval
- Step 9 Moving the Oval and Text
- Step 10 Adding a Circle for Drawing the Sun
- Step 11 Selecting a Programmable Fill Stitch
- Step 12 Adding Broken Lines for Drawing the Sun Rays
- Step 13 Changing the Sewing Order of Sun and Rays
- Step 14 Adjusting the Rays
- Step 15 Setting Hole Sewing
- Step 16 Previewing the Sewing Image
- Step 17 Transferring the Data to a Card
- Step 18 Saving the File
- Using Programmable Stitch Creator
- Creating data for the multi-position frame
- Design Center
- The Screen
- Using the Stage 2 Tool Box
- Using the Stage 3 Tool Box
- Using the Stage 4 Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- Layout & Editing
- The Screen
- Using the Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- File Menu
- Edit Menu
- Image Menu
- Input – from File
- Input – from TWAIN device
- Input – from Portrait
- Input – from Clipboard
- Output – to File
- Output – to Clipboard
- Select TWAIN device
- Modify
- Image to Stitch Wizard
- If Auto Punch is selected:
- If Photo Stitch 1 (Color) is selected:
- [Manual Color Selection]
- If Photo Stitch 1 (Mono) is selected:
- If Photo Stitch 2 (Color) is selected:
- If Photo Stitch 2 (Mono) is selected:
- If Cross Stitch is selected:
- Display Image – On/Faded/Off
- Text Menu
- Sew Menu
- Display Menu
- Option Menu
- Help Menu
- Programmable Stitch Creator
- Quick Reference
- Alphabetic Index
178
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
2 While checking the sample image on the right side of the dialog, select the various facial features.
◆ Select the overall contour (appearance) of the portrait from the Facial Feature list.
Select from narrow, wide, child-like, etc.
◆ Select a part of the portrait from the Part list.
The part of the portrait to be changed can also be selected by clicking it in the sample image.
◆ Drag the Part Variation slider to select the part variation. The selected part variation is shown in the
sample image.
Select the Change Both Left and Right check box to change both sides of a part, such as the eyes or
ears.
◆ Click to display all variations of the selected part.
If the Display With Other Parts check box is selected, images of all parts combined are displayed. If
the check box is not selected, only the variations of the selected part are displayed.
Select a part from the list, and then click OK.
◆ Drag the Part Feature slider to change the part feature.
Select from making the part standard size, slightly larger, slightly smaller, wider or taller.
◆ Click the Color tab to change the color of the part.
3 After the portrait is created, click OK.
The portrait image appears in Design Page.
If the current image is not saved, you will be asked whether you want to save it.
■ Input – from Clipboard
Purpose: Import image data from the clipboard.
Shortcut key: No shortcut key for this function
Toolbar: No button for this function
Operation:
◆ Click OK to save the image.
◆ Click Cancel to finish without saving the image.