Quick Start Manual
Table Of Contents
- Contents
- Before Using
- Getting Started
- Introduction
- About this Chapter
- Using the Auto Punch Function
- Using Design Center
- Using Layout & Editing
- Step 1 Starting Layout & Editing
- Step 2 Importing Embroidery Patterns from Design Center
- Step 3 Zooming In and Out
- Step 4 Moving the Embroidery Pattern
- Step 5 Adding an Oval
- Step 6 Adjusting the Size and Location of the Oval
- Step 7 Adding Text
- Step 8 Fitting the Text around the Oval
- Step 9 Moving the Oval and Text
- Step 10 Adding a Circle for Drawing the Sun
- Step 11 Selecting a Programmable Fill Stitch
- Step 12 Adding Broken Lines for Drawing the Sun Rays
- Step 13 Changing the Sewing Order of Sun and Rays
- Step 14 Adjusting the Rays
- Step 15 Setting Hole Sewing
- Step 16 Previewing the Sewing Image
- Step 17 Transferring the Data to a Card
- Step 18 Saving the File
- Using Programmable Stitch Creator
- Creating data for the multi-position frame
- Design Center
- The Screen
- Using the Stage 2 Tool Box
- Using the Stage 3 Tool Box
- Using the Stage 4 Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- Layout & Editing
- The Screen
- Using the Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- File Menu
- Edit Menu
- Image Menu
- Input – from File
- Input – from TWAIN device
- Input – from Portrait
- Input – from Clipboard
- Output – to File
- Output – to Clipboard
- Select TWAIN device
- Modify
- Image to Stitch Wizard
- If Auto Punch is selected:
- If Photo Stitch 1 (Color) is selected:
- [Manual Color Selection]
- If Photo Stitch 1 (Mono) is selected:
- If Photo Stitch 2 (Color) is selected:
- If Photo Stitch 2 (Mono) is selected:
- If Cross Stitch is selected:
- Display Image – On/Faded/Off
- Text Menu
- Sew Menu
- Display Menu
- Option Menu
- Help Menu
- Programmable Stitch Creator
- Quick Reference
- Alphabetic Index
158
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
2 If you click OK, your current embroidery patterns will be saved on the card. A Now writing message
displays while the data is being transferred to the card.
After a while, the following message will appear.
See also: “Save” and “Save As” on page 156
■ Write to Card – Other PES files
Purpose: Writes multiple PES files to an original card at the same time.
Shortcut key: +
Toolbar: No button for this function
Operation:
1 Click File, then Write to Card, then Other PES files.
This following dialog appears.
◆ Click
to display the information (size, number of stitches, and colors) for the pattern selected
in the Available patterns list or the Selected patterns list. This is available only if one pattern is
selected.
◆ Click
to display a three-dimensional image of the pattern selected in the Available patterns
list or the Selected patterns list.
◆
shows the capacity of the patterns selected in the Selected patterns list.
◆ The Available patterns list [A] displays the images of the pattern files (.pes) saved in the folder
selected after clicking . The name of the file appears below the image.
• Patterns that are either too large or have too many stitches for the embroidery hoop size, selected
with the Hoop size selector, are crossed out with a red .
◆ Click OK.
◆
Use to select
the size of the embroidery hoop that can be
used with your embroidery machine.
NOTE:
Do not select a hoop size larger than the
embroidery hoop that can be used with
your embroidery machine. Otherwise, the
created card will not work correctly with
the embroidery machine.
◆ Click
, and then s
elect the folder
where the pattern file (.pes) is saved.
◆ Click
to switch between the large
and small display size of the pattern
images shown in the lists.
Shift F4
[A]
[B]