Quick Start Manual
Table Of Contents
- Contents
- Before Using
- Getting Started
- Introduction
- About this Chapter
- Using the Auto Punch Function
- Using Design Center
- Using Layout & Editing
- Step 1 Starting Layout & Editing
- Step 2 Importing Embroidery Patterns from Design Center
- Step 3 Zooming In and Out
- Step 4 Moving the Embroidery Pattern
- Step 5 Adding an Oval
- Step 6 Adjusting the Size and Location of the Oval
- Step 7 Adding Text
- Step 8 Fitting the Text around the Oval
- Step 9 Moving the Oval and Text
- Step 10 Adding a Circle for Drawing the Sun
- Step 11 Selecting a Programmable Fill Stitch
- Step 12 Adding Broken Lines for Drawing the Sun Rays
- Step 13 Changing the Sewing Order of Sun and Rays
- Step 14 Adjusting the Rays
- Step 15 Setting Hole Sewing
- Step 16 Previewing the Sewing Image
- Step 17 Transferring the Data to a Card
- Step 18 Saving the File
- Using Programmable Stitch Creator
- Creating data for the multi-position frame
- Design Center
- The Screen
- Using the Stage 2 Tool Box
- Using the Stage 3 Tool Box
- Using the Stage 4 Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- Layout & Editing
- The Screen
- Using the Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- File Menu
- Edit Menu
- Image Menu
- Input – from File
- Input – from TWAIN device
- Input – from Portrait
- Input – from Clipboard
- Output – to File
- Output – to Clipboard
- Select TWAIN device
- Modify
- Image to Stitch Wizard
- If Auto Punch is selected:
- If Photo Stitch 1 (Color) is selected:
- [Manual Color Selection]
- If Photo Stitch 1 (Mono) is selected:
- If Photo Stitch 2 (Color) is selected:
- If Photo Stitch 2 (Mono) is selected:
- If Cross Stitch is selected:
- Display Image – On/Faded/Off
- Text Menu
- Sew Menu
- Display Menu
- Option Menu
- Help Menu
- Programmable Stitch Creator
- Quick Reference
- Alphabetic Index
146
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
4 Bring the APPLIQUE POSITION oval and the APPLIQUE oval at the same position as the APPLIQUE
MATERIAL
oval (using the grid can make this operation easier). You can confirm the appliqué posi-
tion using the preview function (see “Preview” on page 220).
5 Add details as you would with a normal embroidery picture.
When sewing, proceed as follows:
1 Place the appliqué material on the machine and start sewing. At this step, only the APPLIQUE
MATERIAL
outline will be sewn.
2 Remove the appliqué material from the machine and cut along the outline.
3 Place the backing material on the machine and start sewing. At this step, only the APPLIQUE POSI-
TION
outline will be sewn.
4 Affix the appliqué on the marked position with a small amount of fabric glue.
5 Restart sewing. At this step, the APPLIQUE outline will be sewn.
6 Sew the other details of the picture.
Note that the sewing order will be MATERIAL → POSITION → APPLIQUE.
■ Stitch
Purpose: Sets the stitch for outline, region inside, text, manual punching pattern and
imported pattern (after the Stitch to Block function has been applied).
Available: When the cursor is in the selection mode, the Line sew type and Region sew type
selectors are displayed (if they have not been turned off with the Line sew or
Region sew buttons).
When you start one of the drawing modes or select an existing pattern, the sew
type button for that pattern appears.
When you are in the text or manual punching mode or after applying a Stitch to
block setting to an imported pattern.
Operation:
1 Click the sew type selector.
The available options display.
For outlines, Zigzag Stitch, Running Stitch and Motif Stitch are available.
For regions, Satin Stitch, Fill Stitch, Programmable Fill
Stitch
, Motif Stitch and Cross Stitch are avail-
able.
APPLIQUE MATERIAL / APPLIQUE POSITION / APPLIQUE
APPLIQUE MATERIAL / APPLIQUE POSITION / APPLIQUE