Quick Start Manual
Table Of Contents
- Contents
- Before Using
- Getting Started
- Introduction
- About this Chapter
- Using the Auto Punch Function
- Using Design Center
- Using Layout & Editing
- Step 1 Starting Layout & Editing
- Step 2 Importing Embroidery Patterns from Design Center
- Step 3 Zooming In and Out
- Step 4 Moving the Embroidery Pattern
- Step 5 Adding an Oval
- Step 6 Adjusting the Size and Location of the Oval
- Step 7 Adding Text
- Step 8 Fitting the Text around the Oval
- Step 9 Moving the Oval and Text
- Step 10 Adding a Circle for Drawing the Sun
- Step 11 Selecting a Programmable Fill Stitch
- Step 12 Adding Broken Lines for Drawing the Sun Rays
- Step 13 Changing the Sewing Order of Sun and Rays
- Step 14 Adjusting the Rays
- Step 15 Setting Hole Sewing
- Step 16 Previewing the Sewing Image
- Step 17 Transferring the Data to a Card
- Step 18 Saving the File
- Using Programmable Stitch Creator
- Creating data for the multi-position frame
- Design Center
- The Screen
- Using the Stage 2 Tool Box
- Using the Stage 3 Tool Box
- Using the Stage 4 Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- Layout & Editing
- The Screen
- Using the Tool Box
- Using the Sewing Attributes Bar
- Using the Menu Bar and the Toolbar
- File Menu
- Edit Menu
- Image Menu
- Input – from File
- Input – from TWAIN device
- Input – from Portrait
- Input – from Clipboard
- Output – to File
- Output – to Clipboard
- Select TWAIN device
- Modify
- Image to Stitch Wizard
- If Auto Punch is selected:
- If Photo Stitch 1 (Color) is selected:
- [Manual Color Selection]
- If Photo Stitch 1 (Mono) is selected:
- If Photo Stitch 2 (Color) is selected:
- If Photo Stitch 2 (Mono) is selected:
- If Cross Stitch is selected:
- Display Image – On/Faded/Off
- Text Menu
- Sew Menu
- Display Menu
- Option Menu
- Help Menu
- Programmable Stitch Creator
- Quick Reference
- Alphabetic Index
138
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
Operation:
1 Type the desired value on the Edge radius selector (0 - 100 mm or 0 - 3.93 inches) and press the
key or click on the Edge radius selector to display the available values.
2 Click the desired value.
The setting applies to all the patterns that you will create in the Rectangle Drawing mode until you
change the setting.
If a rectangle is selected, the setting also applies to that rectangle.
See also: “Rectangle Drawing Mode” on page 131
■ Path shape
Purpose: Opens and closes broken lines and curves.
Available: When you click on the Tool Box to start the outline Drawing mode.
When you select an existing broken line or curve with the cursor in Selection
mode.
Operation:
1 Click on the Path shape selector.
Two options are available.
2 Click the desired option.
The setting applies to all the patterns that you will create in the outline Drawing mode until you
change the setting.
If a broken line or curve is selected, the setting applies to that broken line or curve.
See also: “Outline Drawing Mode” on page 131
Setting Text Attributes
■ Font
Purpose: Selects a font for text.
Available: When you click on the Tool Box to start the Text Input mode.
When you select existing text patterns with the cursor in Selection mode.
When you select characters with the cursor in Point Edit mode.
Enter