Quick Start Manual

130
Contents Before Using Getting Started Design Center Layout & Editing
Programmable
Stitch Creator
Quick Reference Alphabetic Index
■ Drawing a fan shape
1
Click on the Tool Box.
The shape of the cursor changes to and displays together with a small ellipse. The Sewing
Attributes bar now looks like this:
You can select the colors and stitches at this step or after creating the pattern. See “Color” on
page 144 and “Stitch” on page 146.
You can also set the sewing attributes using the Sew menu (see “Sewing Attribute Setting” on
page 204). You must decide now which kind of circle-related graphic you need.
2 Click the Arc shape selector, then click Fan shape.
3 Proceed as you would to draw a circle or an ellipse.
When you release the mouse, a radial line appears on the ellipse.
4 Move the cursor (without dragging) to the start point of the fan shape and click.
The radial line disappears.
5 Move the cursor (without dragging) to the end point of the fan shape and click.
■ Drawing an arc & string
1
Click on the Tool Box.
The shape of the cursor changes to and displays together with a small ellipse. The Sewing
Attributes bar now looks like this:
You can select the colors and stitches at this step or after creating the pattern. See “Color” on
page 144 and “Stitch” on page 146.
You can also set the sewing attributes using the
Sew menu (see “Sewing Attribute Setting” on
page 204).
You must decide now which kind of circle-related graphic you need.
2 Click the Arc shape selector, then click Arc & String.
3 Proceed as you would to draw a circle or an ellipse.
When you release the mouse, a radial line appears on the ellipse.
4 Move the cursor (without dragging) to the start point of the arc & string and click.
The radial line disappears.
Click at start point
Move to end point
Click at end point