Setup guide

ManualsBrandsBrother ManualsComputer equipmentNC7100W - NC 7100w Print Server

Wireless Print Server

for 802.11b and 802.11g

NC-7100w

Quick Setup Guide

This product is approved for use in the country of purchase only.

Do not use this product outside the country of purchase as it may

violate the wireless telecommunication regulations of that country.

Please read this Quick Setup Guide before you install the NC-7100w and

use the printer on the wireless network.

For more details about how to optimize the wireless print server, please

refer to the NC-7100w Network User’s Guide on the CD-ROM we have

supplied with NC-7100w.

Keep this Quick Setup Guide and supplied CD-ROM in a convenient

place for quick and easy reference at all times.

Summary of content (13 pages)

PAGE 1
Wireless Print Server for 802.11b and 802.11g NC-7100w Quick Setup Guide This product is approved for use in the country of purchase only. Do not use this product outside the country of purchase as it may violate the wireless telecommunication regulations of that country. Please read this Quick Setup Guide before you install the NC-7100w and use the printer on the wireless network.
PAGE 2
English 3 Carton Components 3 1 Documentation View NC-7100w Network User’s Guide and the Quick Seup Guide in PDF format. Setting up the Print Server 2 1 2 3 Step 1 NC-7100w wireless print server Installing the Print Server Quick Setup Guide CD-ROM (including setup software and NC-7100w Network User’s Guide) What is supplied on the CD-ROM 1 Turn off the printer power switch, and then unplug the printer if connected. Disconnect the interface cable from the printer.
PAGE 3
5 Put the NC-7100w print server connector firmly into the connector of the main controller board by aligning the two screws to the groove of the printer, and then secure it with the two screws. To configure the NC-7100w from a wireless computer on your network, you must temporarily change your current wireless settings. Before changing the current wireless settings of your PC, we recommend you make a note of your current wireless network settings using the chart on the right.
PAGE 4
English For Windows® 98/Me/2000, Windows NT®4.0 Users 3 Select and right click Wireless Network Connection. Click View Available Wireless Networks. 4 You can see the Brother wireless print server in the Available wireless networks box. Select SETUP and check the Allow me to connect... check box. Click the Connect button. 5 Check the wireless network connection status. It may take a few minutes for the IP address to be shown on screen.
PAGE 5
If the Brother wireless print server you want to choose is not listed, follow these steps: 3 1 Move your printer with the wireless print server installed closer to your PC, or reorient the print server and try again. 2 Reset the print server back to its default factory setting and try again. See Other Information in this Quick Setup Guide for information how to reset to factory default setting. 3 Refer to Chapter 10 of the NC-7100w Network User’s Guide on the CD-ROM we have supplied with NC-7100w.
PAGE 6
English 2 Click Setup. 3 Click Wireless Setup Wizard. 4 Review the Welcome information and when you are sure you have completed the necessary tasks, click Next. 5 The search will display a list of found Brother Wireless Devices. Select the device you wish to configure and click Next. 6 If your network supports DHCP, choose Obtain an IP address automatically and the NC-7100w will automatically obtain IP address information from your network.
PAGE 7
We recommend that you contact your network administrator if you are unsure about the correct IP address settings. 7 A list of the found Wireless Networks will be displayed. Select the Access Point/Base Station or Ad-hoc network you wish to associate the NC-7100w with and click Next. If the Access Point/Base Station or Ad-hoc network does not appear on the list, you can manually add it by clicking Add. Follow the on screen instructions for entering the SSID and Channel number.
PAGE 8
English 11 When the Setup Complete screen appears, click Next. 12 Using the information you recorded in Step 2, return the wireless settings of your computer back to their original settings. Click Exit. Network Key: There are some rules for each security method: Open System / Shared Key with WEP Enter the WEP key that will be used to access your network. This key is a 64-bit or 128-bit value that must be entered in an ASCII or HEXADECIMAL format. ■ 64 (40) bit ASCII Uses 5 text characters. e.g.
PAGE 9
Step 4 4 Click Add. 5 Select IP Printing. Installing the Printer Driver and Network Print Software You need to install the printer driver and network print software, and configure it for the wireless network connection of the printer. Please follow the steps below. For Mac OS X 10.2.4 or greater users: If you want to connect your printer using Rendezvous, select Rendezvous and then the HL-6050D_DN series. Setup is now complete. (For Mac OS® X 10.1 to 10.
PAGE 10
English xxxxxx is the last six digits of the MAC address. You can find the MAC address by printing out the Network Configuration Page. See Other Information in this Quick Setup Guide for information how to print the Network Configuration Page. 7 Select Brother from the Printer Model pull-down list. 8 Select HL-6050D/DN BR-Script3, and then click Add.
PAGE 11
Important Information: Regulations Federal Communications Commission (FCC) Declaration of Conformity Responsible Party:Brother International Corporation 100 Somerset Corporate Boulvard Bridgewater, NJ 08807-0911, USA Telephone: (908) 704-1700 declares, that the products Product Name: Model Number: Brother Network Card (BR-net) NC-7100w / NC-7100 (NC-7100 is a wireless LAN card which is installed in NC-7100w) complies with Part 15 of the FCC Rules.
PAGE 12
English Intel Copyright and License Information This product includes object code from Intel's UPnP SDK. The following is the copyright and licensing information for Intel UPnP SDK. Copyright Intel Corporation 2004 All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: ■ ■ ■ Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer.