ESC/ P Command Reference
Table Of Contents
- Chapter 1. General Information
- Chapter 2. Command information
- 2-1) Character/style selection commands
- 2-2) Text printing commands
- ESC 4 Apply italic style
- ESC 5 Cancel italic style
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Specify double printing
- ESC H Cancel double printing
- ESC P Specify pica pitch
- ESC M Specify elite pitch
- ESC g Specify micron pitch
- ESC p Specify proportional characters
- ESC W Specify double-width characters
- SO Specify auto-cancelling enlarged characters
- ESC SO Specify auto-cancelling enlarged characters
- SI Specify half-width characters
- ESC SI Specify half-width characters
- DC2 Cancel half-width characters
- DC4 Cancel auto-cancelling double-width characters
- ESC - Apply/cancel underlining
- ESC ! Global formatting
- ESC SP Select character spacing for ANK characters
- ESC X Select alphanumeric/kana character size
- 2-3) Line feed amount commands
- 2-4) Horizontal movement commands
- 2-5) Vertical movement commands
- 2-6) Paper formatting
- 2-7) Printer control commands
- 2-8) Graphics commands
- 2-9) Advanced commands
- Chapter 3. Appendix
VT Apply vertical tab
[ASCII] VT
[Decimal] 11
[Hexadecimal] 0B
[Parameters] None
[Description]
・ Moves the print position from the position where VT was entered to the next nearest vertical
tab position below.
35
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
VT code
Tab position
Tab position
Tab position
17
18
Line
ABCD
EfghijkL
A
bcdefg
A
BCDEFG
A
bcdefgh
VT code
VT code
Line feed
amount
Example: If vertical tabs are set at lines 6, 11 and 15, and text is entered while
VT is performed