ESC/ P Command Reference
Table Of Contents
- Chapter 1. General Information
- Chapter 2. Command information
- 2-1) Character/style selection commands
- 2-2) Text printing commands
- ESC 4 Apply italic style
- ESC 5 Cancel italic style
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Specify double printing
- ESC H Cancel double printing
- ESC P Specify pica pitch
- ESC M Specify elite pitch
- ESC g Specify micron pitch
- ESC p Specify proportional characters
- ESC W Specify double-width characters
- SO Specify auto-cancelling enlarged characters
- ESC SO Specify auto-cancelling enlarged characters
- SI Specify half-width characters
- ESC SI Specify half-width characters
- DC2 Cancel half-width characters
- DC4 Cancel auto-cancelling double-width characters
- ESC - Apply/cancel underlining
- ESC ! Global formatting
- ESC SP Select character spacing for ANK characters
- ESC X Select alphanumeric/kana character size
- 2-3) Line feed amount commands
- 2-4) Horizontal movement commands
- 2-5) Vertical movement commands
- 2-6) Paper formatting
- 2-7) Printer control commands
- 2-8) Graphics commands
- 2-9) Advanced commands
- Chapter 3. Appendix
22
2-2) Text printing commands
ESC 4 Apply italic style
[ASCII] ESC 4
[Decimal] 27 52
[Hexadecimal] 1B 34
[Parameters] None
[Description]
・ Applies the italic character style.
ESC 5 Cancel italic style
[ASCII] ESC 5
[Decimal] 27 53
[Hexadecimal] 1B 35
[Parameters] None
[Description]
・ Cancels the italic character style.
ESC E Apply bold style
[ASCII] ESC E
[Decimal] 27 69
[Hexadecimal] 1B 45
[Parameters] None
[Description]
・ Prints subsequent print data in bold.
ESC F Cancel bold style
[ASCII] ESC F
[Decimal] 27 70
[Hexadecimal] 1B 46
[Parameters] None
[Description]
・ Cancels the bold style.