ESC/ P Command Reference
Table Of Contents
- Chapter 1. General Information
- Chapter 2. Command information
- 2-1) Character/style selection commands
- 2-2) Text printing commands
- ESC 4 Apply italic style
- ESC 5 Cancel italic style
- ESC E Apply bold style
- ESC F Cancel bold style
- ESC G Specify double printing
- ESC H Cancel double printing
- ESC P Specify pica pitch
- ESC M Specify elite pitch
- ESC g Specify micron pitch
- ESC p Specify proportional characters
- ESC W Specify double-width characters
- SO Specify auto-cancelling enlarged characters
- ESC SO Specify auto-cancelling enlarged characters
- SI Specify half-width characters
- ESC SI Specify half-width characters
- DC2 Cancel half-width characters
- DC4 Cancel auto-cancelling double-width characters
- ESC - Apply/cancel underlining
- ESC ! Global formatting
- ESC SP Select character spacing for ANK characters
- ESC X Select alphanumeric/kana character size
- 2-3) Line feed amount commands
- 2-4) Horizontal movement commands
- 2-5) Vertical movement commands
- 2-6) Paper formatting
- 2-7) Printer control commands
- 2-8) Graphics commands
- 2-9) Advanced commands
- Chapter 3. Appendix
21
[Description]
・ Selects the font.
n=0 Brougham (better for fixed-width)
n=1 Letter Gothic Bold (better for fixed-width)
n=2 Brussels (better for proportional)
n=3 Helsinki (better for proportional)
n=4 San Diego (better for proportional)
・ The default setting is n=0 Brougham (better for fixed-width).
** These parameters are supported by MW-145BT and MW-260.
[Parameters] 00h ≤ n ≤ 04h (bitmap fonts)
[Parameters] 09h ≤ n ≤ 0Bh (outline fonts)
[Description]
・ Selects the font.
n=0 Brougham (better for fixed-width)
n=1 Letter Gothic Bold (better for fixed-width)
n=2 Brussels (better for proportional)
n=3 Helsinki (better for proportional)
n=4 San Diego (better for proportional)
n=9 Letter Gothic (better for fixed-width)
n=10 Brussels (better for proportional)
n=11 Helsinki (better for proportional)
・ The default setting is n=0 Brougham (better for fixed-width).
ESC t Select character code table
[ASCII] ESC t n
[Decimal] 27 116 n
[Hexadecimal] 1B 74 n
[Parameters] n=0, 1, 2
[Description]
・ From the two built-in character code tables, selects the character code table to be used.
・ n=0: Code table for regular characters
・ n=1: Code table for Eastern European characters
・ n=2: Code table for Western European characters
・ n=3: (Spare)
・ The default setting is n=0.